Preparations For Playback - Sony Betacam SX DNW-A22 Operation Manual

4-1 Preparations for Playback

Switch settings
Before beginning playback, make any necessary
switch settings.
AUDIO MONITOR SELECT buttons
(see page 2-2) : select the audio
channel(s) to be monitored
POWER switch: ON
Time data selection
Displayed time data
Use the CTL/TC/UB button to select one of CTL
(control), time code, and user bit values. When you
select time code, the data displayed is determined by
the setting (LTC/VITC) of the TC switch as follows.
For details of the settings of each of the switches, refer to
the pages indicated in parenthesis.
CTL/TC/UB button (see page 2-4) :
select the time data to be displayed
TC switch
setting
LTC
VITC
TC switch (see page 2-3) :
select the time code to be
displayed
Displayed data
LTC recorded on tape
VITC recorded on tape
Chapter 4 Playback
4-1