Basic Operations Transferring Songs From The Computer To Music Clip Player (Check-Out) - Sony VAIO Music Clip MC-S50 Operating Instructions Manual

Basic Operations
Transferring songs from the computer
to Music Clip player (Check-out)
Notes
• Be sure to install
OpenMG Jukebox
before connecting
Music Clip player.
• When you connect
Music Clip player to
the computer for the
first time, the window
for installing the
driver appears.
Follow the
instructions in the
window.
• Click OK when the
dialog box that says
the driver is not
digitally signed
appears in Windows
2000.
• Music Clip player is
inactive while
connected to the
computer.
• Use of this player with
a USB hub or a USB
extension cable is not
guaranteed.
• Music Clip player
may not work if
certain USB devices
are connected at the
same time.
• Some computers may
not work correctly
after recovering from
the suspended mode.
Disconnect the USB
cable and reconnect it.
• When you close the
lid of USB connector,
push it securely until
it is locked.
In order to check out digital audio files from your
computer, first you must install the supplied OpenMG
Jukebox software and then import digital audio files to
OpenMG Jukebox.
For details, refer to the OpenMG Jukebox Operating
Instructions.
1
Connect Music Clip player to your computer.
You can see "PC" on the display when you connect
Music Clip player to your powered PC. This means
that the power to Music Clip player is supplied from
the PC.
To the USB
connector
USB cable (supplied)
2
Transfer the music file to Music Clip player
(Check-out).
For details on how to operate, refer to the Open MG
Jukebox Operating Instructions.
zTip
To transfer the song back to the computer (check-in), refer to
the OpenMG Jukebox software instruction manual or the
online help.
Face the SONY
logo upward
To the USB
connector
9