Sony Betacam SX DNW-A22 Operation Manual page 15

4 PLAY button
To start playback, press this button, turning it on.
To operate in capstan override mode
Hold down this button, and turn the search dial.
For details of capstan override mode, see the item relating
to the search dial (this page).
5 REW (rewind) button
To rewind the tape, press this button, turning it on.
6 EJECT button
Press this button to eject the cassette. While the
cassette is being ejected, this button lights.
4 Search control section
1 SHUTTLE button
2 JOG button
SHUTTLE JOG
REVERSE
3 Search dial
1 SHUTTLE button
To use the search dial for playback in shuttle mode,
press this button, turning it on.
For details of playback in shuttle mode, see the item for the
search dial 3.
FORWARD
2 JOG button
To use the search dial for playback in jog mode, press
this button, turning it on.
For details of playback in jog mode, see the item for the
search dial 3.
3 Search dial
Turn this to carry out playback in the modes shown in
the following table. Turn the dial clockwise for
forward playback and counterclockwise for reverse
playback.
You can carry out noiseless playback in the range of
±1 times normal speed from a Betacam SX format
tape.
Playback modes using the search dial
Playback mode Operations and functions
Shuttle Press the SHUTTLE button or the search
dial so that the SHUTTLE button lights,
then turn the search dial. Playback is
carried out at a speed determined by the
position of the search dial. The playback
speed range is as follows:
• Using a Betacam SX tape: –50 to +50
times normal speed
• Using an analog Betacam tape: –35 to
+35 times normal speed for DNW-A22
or –42 to +42 times normal speed for
DNW-A22P
The search dial has detents at the still
position and at ±10 times normal speed.
Jog Press the JOG button or the search dial
so that the JOG button lights, then turn
the search dial. Playback is carried out
at a speed determined by the speed of
rotation of the search dial. The playback
speed range is –1 to +1 time normal
speed:
The search dial has no detents.
Capstan Hold down the PLAY button and turn the
override search dial to adjust the playback speed
in the range of ±15%. Use this for phase
adjustment between this unit and an
external connected device.
Changing the setting of extended menu item 101
enables you to use the search dial alone to select
shuttle/jog modes, without using the SHUTTLE, and
JOG buttons.
Chapter 2 Location and Function of Parts
2-7