Upper Control Panel - Sony Betacam SX DNW-A22 Operation Manual

2-1 Control Panels

2-1-1 Upper Control Panel

1 POWER switch
POWER
ON
OFF
PHONES
3 PHONES jack and control
1 POWER switch
This powers the unit on and off. When the unit is
powered on, the fluorescent display in the lower
control panel lights.
To power the unit off, press the side of the POWER
switch marked "OFF".
2-2
Chapter 2 Location and Function of Parts
2 AUDIO MONITOR SELECT buttons
Cassette compartment
ANALOG / DIGITAL
AUDIO MONITOR SELECT
CH-1 CH-2 CH-3 CH-4 LTC
L
VITC
R
2 AUDIO MONITOR SELECT buttons
Press the buttons in the L and R rows to select the
audio signal channels (channels 1 to 4, identified as
CH-1 to CH-4) output from the MONITOR OUTPUT
L and MONITOR OUTPUT R connectors.
You can press two or more buttons simultaneously in
each row, turning them on, to monitor an output
produced by mixing the selected channels.
DF
NDF
TC
4 Time code setting section