Sony Betacam SX DNW-A22 Operation Manual page 28

5-2 Basic Menu
Item number Item name
005 DISPLAY INFORMATION
SELECT
007 TAPE TIMER DISPLAY
009 a) CHARACTER TYPE
011 a) CHARACTER V-SIZE
013 525/625 SYSTEM
SELECT
Before using this menu
item, consult the person
responsible for the
installation.
B01 RECALL BANK 1
B02 RECALL BANK 2
B03 RECALL BANK 3
B04 RECALL BANK 4
B11 SAVE BANK 1
B12 SAVE BANK 2
B13 SAVE BANK 3
B14 SAVE BANK 4
B20 RESET SETUP
a) When setting items 002, 003, 009, and 011, watch the
monitor screen, and adjust to the required state.
5-2
Chapter 5 Menu System
Settings
Determines the kind of character information to be output from the COMPOSITE
VIDEO OUTPUT 2 (SUPER) connector when the CHARACTER switch on the
subsidiary control panel is set to ON.
T&STA : Time data display information and the unit's status.
T&UB: Time data display information and the user's bits.
T&CTL: Time data display information and CTL.
T&T: Time data display information and time code (LTC or VITC).
TIME: Time code (LTC or VITC) only.
If there is a overlap between the setting of this item and the setting of the control
panel, it is automatically avoided. For example, if CTL is selected on the control
panel and this menu item setting is T&CTL, then CTL and LTC are output.
Determines whether to display the CTL count in 12-hour mode or 24-hour mode.
+ –12H: 12-hour mode
24H: 24-hour mode
Determines the type of characters such as time code output from the
COMPOSITE VIDEO OUTPUT 2 (SUPER) connector for superimposed display
on the monitor.
WHITE: White letters on a black background.
BLACK: Black letters on a white background.
W/OUT: White outline letters.
B/OUT: Black outline letters.
Determines the vertical size of characters such as time code output from the
COMPOSITE VIDEO OUTPUT 2 (SUPER) connector for superimposed display
on the monitor.
×1: Standard size
×2: 2 times standard size
×3: 3 times standard size
×4: 4 times standard size
Specify whether to enable switching between the 525 (NTSC) and 625 (PAL)
systems.
OFF: Do not enable system switching.
ON: Enable system switching.
Setting this item to ON and switching the system enables the unit to operate in
the system switched to.
Note
When using the DNW-A22 in 625 mode or when using the DNW-A22P in 525
mode, you cannot play back the Betacam/Betacam SP tapes.
For information on how to switch the system, see the section "Switching between
525/625 line systems (menu item 013)" (page 5-5).
Set to ON to recall menu settings from menu bank 1.
Set to ON to recall menu settings from menu bank 2.
Set to ON to recall menu settings from menu bank 3.
Set to ON to recall menu settings from menu bank 4.
Set to ON to save current menu settings to menu bank 1.
Set to ON to save current menu settings to menu bank 2.
Set to ON to save current menu settings to menu bank 3.
Set to ON to save current menu settings to menu bank 4.
Set to ON to reset current active settings to factory default values.