SRAM RockShox SEKTOR Service Manual page 32

Remove the fork from the work stand and pour the suspension oil into
3
an oil pan.
Clamp the fork into the work stand.
4
Thread the bottom bolt onto the rebound damper shaft and push the
shaft into the upper tube.
Remove the retaining ring. Use your finger to guide the retaining ring
5
over the rebound shaft.
Do not scratch the rebound damper shaft. Scratches will allow oil to
leak into the lower leg, resulting in reduced damper performance and
potential damage to the fork.
NOTI CE
Retaining ring pliers
32
Damper Removal