SRAM RockShox SEKTOR Service Manual page 20

Pull the air shaft out firmly to dislodge the seal head. Remove the air
6
spring assembly from the upper tube.
Remove the bolt.
80 mm - 120 mm: Remove the seal head base plate assembly,
7
All-Travel spacer if installed (not pictured), and the top out bumper.
Clean and inspect the shaft for damage.
130 mm - 150 mm: Remove the base plate, wave spring, retaining
washer, seal head bumper, All-Travel spacer if installed (not pictured),
floating seal head, and top out bumper.
Clean and inspect the shaft for damage.
Scratches on the air spring shaft can cause air to leak. If a scratch is
visible the air spring assembly may need to be replaced.
NOTI CE
80 mm - 120 mm
130 mm - 150 mm
130 mm - 150 mm
80 mm - 120 mm
130 mm - 150 mm
130 mm - 150 mm
20
Air Spring Removal