SRAM RockShox SEKTOR Service Manual page 16

Soak new foam rings in RockShox® suspension oil.
4
Install the new foam rings into the lower leg.
Remove the outer wire spring from each new dust wiper seal and set
5
them aside.
Insert the narrow end of a new wiper seal into the recessed end of the
6
32 mm Flangeless Dust Seal Installation tool.
If the RockShox x Abbey Bike Tools™ installation tool is used, confirm
the 32 mm installation puck is tightened hand tight on the installation
tool handle to avoid damage to the installation puck during use.
NOTI CE
15wt
Abbey Bike Tools Dust Seal Installation Tool
RockShox Flangeless Dust Seal Installation Tool
16
Lower Leg Seal Service