Connect To Server - BITMAIN R4 Manual

4 Connect to Server

Step 1. The default DHCP network protocol distributes IP addresses automatically. Please
download IPReporter.zip
find out the IP of the server.
1. Extract the file and double click 'IPReporter.exe'.
The 'Shelf, Step, Position' options are suitable for farm servers to mark the location of
the servers. For home servers, it can be left as default.
Then click 'Start'.
2. Press the IP Reporter button on the controller board for about 5 seconds and you'll hear
a beep sound:
(only supported by Windows) , then please follow the below steps to
R4 Server Manual
Last updated: 8/30/2016
Page 5 of 11
Page 5 / 11