System Configuration And Status; System Upgrading - BITMAIN R4 Manual

R4 Server Manual
Last updated: 8/30/2016
Page 9 of 11

7 System Configuration and status

7.1 System Upgrading

You can upgrade the server's firmware on the 'System > Upgrade' page.
'Keep setting' is chosen by default and should be enabled if you want to keep your current
settings. You should deselect this option if you are trying to return the server to default settings.
Click 'Browse' button to choose upgrade file. Select the upgrade and click the 'Flash image' button.
The interface will display if the firmware can be upgraded and download the software. During
the upgrade process, you need to wait patiently, and must keep power on, otherwise, the
server can only be fixed with returned to factory. You will see below screenshot after
upgrading successfully.
Clicking the 'Reboot' button will restart the server so it can load the new software. Clicking
'Go Back' will keep the server mining before switching to the new software when it is restarted
next time or power cycled.
Page 9 / 11