Password Modification; Software Version Checking; Restore Initial Setting - BITMAIN R4 Manual

R4 Server Manual
Last updated: 8/30/2016
Page 10 of 11

7.2 Password Modification

The server login password can be changed on the 'System->Administration' page. Once
modified, press 'Save and Apply' to save the new password.
7.3 Software Version
You can check which version of the software you are currently running on the 'System >
Overview' page. 'File System version' displays the date of the firmware your server use. In the
example below, the server is using 20160527 firmware.

7.4 Restore Initial Setting

There is a 'Reset' button on the right hand side of the ETH port, next to the green and red LED
light. Power on server and let it run for 5 minutes, then press and hold the reset button for 10
seconds in order to restore to the default settings and reboot. The red LED will flash once every
15 seconds automatically if the reset is operated successfully.
Page 10 / 11