Overview; Features; Connect To Server - BITMAIN S4+ Manual

1 Overview

Bitmain is introducing the newest server: the S4+ server. More powerful and efficient than its
predecessor, the S4+ packs quite a punch. It uses the state of the art BM1382 chip powered by
ultra-low power 28nm technology, with 2570Gh/s hash rate. S4+ will be shipped out with built-in
PSU and it's tested and configured prior to shipping to make it easier for customers to set up.
Please note:
1. The included PSU cannot be used in countries with a mains power voltage lower than 205V.
The PSU will not start below this voltage.
2. Power line is not included, please find one with at least 10A in your local market.

2 Features

Ideal Hash Rate (GH/s)
Default chip clock (M)
Estimate power on wall (W)
Estimate efficiency on wall (J/GH)
Dimensions (mm)
Weight (kg)

3 Connect to Server

Step 1. The default DHCP network protocol distributes IP addresses automatically.
Please download IPReporter.zip
2570
200
1480
0.58
432 x 442 x 133
14.4
, then please follow below steps to find out the IP of
S4+ Server Manual
Last updated: 4/22/2015
Page 3 of 10
Page 3 / 10