Table of Contents
Advertisement
S4 Server Manual
Last updated: 9/29/2014
Page 3 of 8
1 Overview
The S4 Server is a chassis style 2TH/s bitcoin server with PSU. It has been assembled before Fab
out.
PSU inside: 1400W, 80PLUS gold, C14 input socket. Power line not included. You may look for one
line with no less than 16A in your local market.
LCD screen: Here shows IP address, Hashrate, Max temperature. There are also status LEDS, reset
button and beep on the screen.
Casing size: 3U Rack, 432mm*442mm*133mm.
2 Connect to Server
Step 1. The default DHCP network protocol distributes IP addresses automatically.
After you have your server hooked up, you will see the IP address on the LCD display.
Step 2. Connect your server to the PC with network cable.
Step 3. Enter server's IP address into your web browser, then login in to the server console.
The default username and password for S4 is 'root'.
Through 'Network', you will be able to modify the server's IP address, and choose 'Save and
Apply' after modifying it.
Page 3 / 8
Advertisement
Table of Contents
