1. Manuals
  2. Brands
  3. vita Manuals
  4. Dental equipment
  5. VACUMAT 6000 MP
  6. Operating manual

vita VACUMAT 6000 MP Operating Manual

Hide thumbs Also See for VACUMAT 6000 MP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Manual
VITA VACUMAT
6000 MP
®
Operating manual
VITA Farbkommunikation
VITA Farbkommunikation
VITA shade determination
VITA shade communication
VITA shade reproduction
VITA shade control
Date of issue: 09.18
VITA – perfect match.

Advertisement

Table of Contents
loading

Related Manuals for vita VACUMAT 6000 MP

Summary of Contents for vita VACUMAT 6000 MP

  • Page 1 VITA VACUMAT 6000 MP ® Operating manual VITA Farbkommunikation VITA Farbkommunikation VITA shade determination VITA shade communication VITA shade reproduction VITA shade control Date of issue: 09.18 VITA – perfect match.

  • Page 3: Table Of Contents

    2 Scope of delivery 2.1 Control unit 2.2 Accessories (can be purchased separately) 3 Technical information 3.1 General description of the furnace VITA VACUMAT 6000 MP 4 Technical data 4.1 Dimensions/weights 4.1.1 Furnace VITA VACUMAT 6000 MP 4.2 Electrical data 4.2.1 Furnace...

  • Page 4: Introduction

    (maintenance, inspection, repairs), either with or on the device. We hope that you will find using the VITA VACUMAT 6000 MP to be an enjoyable and successful experience. Copyright These operating instructions must be treated as confidential.

  • Page 5: Scope Of Delivery

    To operate with 1 VITA VACUMAT 6000 M / 6000 MP or VITA ZYRCOMAT 6000 MS, the VITA vPad comfort can be used. An additional VITA SWITCHBOX is required for the operation of 2 or more VITA VACUMAT 6000 M / 6000 MP / ZYRCOMAT 6000 MS with a VITA vPad excellence.

  • Page 6: Technical Information

    VITA VACUMAT 6000 MP ® Technical information 3.1 General description of the furnace VITA VACUMAT 6000 MP • High-performance technology – extremely accurate temperature control for optimum firing results • Time-saving, user-friendly convenience and a small footprint • Casing made of coated or stainless steel plate •...

  • Page 7: Intended Use

    VITA VACUMAT 6000 MP ® 5 Intended use Basic information on the instrument design The device is designed according to state-of-the-art technology and recognized safety standards. However, if it is used inappropriately, hazards for the health and safety of the user or third parties may arise as well as the risk of damaging the device and other material property.

  • Page 8: Ambient Conditions

    Fluctuations in nominal voltage are not greater than plus/minus 10% of the nominal voltage. 8 Safety functions The furnace is in operation with the control unit VITA vPad comfort or VITA vPad excellence and has the following safety and monitoring features: •...

  • Page 9: Installation And First Use

    Device fuses (see Section 9.5) Connection for control unit Connection for vacuum pump VITA Switchbox (see sect. 4.2.2) Pressure regulator 3 bar Connection for control unit VITA vPad excellence/VITA vPad comfort Mains power supply connection Vacuum tube connection Main switch...

  • Page 10: Pressurized Air Connection

    Set the pressure output of the device to a maximum of 5 bar. See the operating manual regarding the settings for the pressing pressure VITA vPad excellence /comfort (see Section 19.3) 9.4 Status display The status display shows the following operating modes: •...

  • Page 11: Connecting The Device To The Mains Voltage

    VITA VACUMAT 6000 MP ® Never operate the device in any case without the firing socket installed. In continuous operation (max. firing temperature, max. firing time), some parts of the firing chamber may reach high temperatures (above 70°C). Do not reach into the open firing chamber when the device is switched on.

  • Page 12: Cleaning The Furnace

    VITA VACUMAT 6000 MP ® 10 Cleaning the furnace Before each cleaning operation, remove the power supply plug! It is not necessary to clean the inside of the firing chamber. Cleaning the casing of the firing chamber at regular intervals with a damp cloth contributes to its operating safety.

  • Page 13: Mains Power Supply Failure

    The warranty and liability are based on the terms and conditions stipulated in the contract. In the event of software modifications without the knowledge and approval of VITA Zahnfabrik H. Rauter GmbH & Co. KG, all liability and warranty claims are invalidated. 14.1 Spare parts Spare parts must comply with the technical requirements specified by the manufacturer.

  • Page 14: Alphabetical Table Of Contents

    Dimensions/weights Disposal Technical data Technical information Electrical data Unauthorized modes of operation Firing chamber insulation Vacuum pump Fuses VITA vPad comfort VITA vPad excellence General description Guarantee Identification plates Installation and first use Installation location Installation plates Intended use Liability...
  • Page 16 The VITA Modulbox is not necessarily a component of the product. Date of issue of this information: 09.18 After the publication of this information for use any previous versions become obsolete.

Table of Contents