Theory Of Operation; Apexpro Telemetry System; Ats - GE ApexPro Service Manual

Equipment overview

Theory of operation

ApexPro Telemetry System

ATS

Overview
2-8
Unity Network Connection
Unity Network MC network
Unity Network IX network
Unity Network RX network
For the physical locations of the Unity Network connection ports on the back of the
ATS, refer to Views on page
The ATS is part of the ApexPro Telemetry System. The ApexPro Telemetry System
provides real-time patient data/alarms to one or more CIC Pro centers.
ApexPro telemetry provides clinicians with patient physiological information while
allowing for patient mobility.
The ApexPro Telemetry System components include:
For Channelized Telemetry
ATS
CIC Pro center
Receiver system
Antenna system
Transmitter(s)
NOTE
For information on software and hardware compatibility, see the ApexPro
Telemetry System What's In This Release.
Provides the hardware/software connection between the ApexPro Telemetry System
and the Unity Network MC network.
The ATS runs the ApexPro host software application, which performs the following
functions:
Analyzes data from the receiver system.
Assigns care unit and bed numbers to receivers.
ApexPro™ Telemetry
Network Port marked MC
Network Port marked IX
Network Port marked RX
2-2.
ATS
CIC Pro center
Access points
Transceiver(s)
Connection Port
For FH Telemetry
2001989-203C