Service Requirements; Equipment Identification - GE ApexPro Service Manual

Service requirements

Equipment identification

2001989-203C
Manufacturer name and address.
European authorized representative.
Follow the service requirements listed below, and the requirements listed under
Maintenance on page
Refer equipment servicing to authorized GE service personnel only.
Any unauthorized attempt to repair equipment under warranty voids that
warranty.
It is the user's responsibility to report the need for service to GE or to one of their
authorized agents.
Failure on the part of the responsible individual, hospital, or institution using this
equipment to implement a satisfactory maintenance schedule may cause undue
equipment failure and possible health hazards.
Regular maintenance, irrespective of usage, is essential to ensure that the
equipment is always functional when required.
Every GE device has a unique serial number for identification. A sample of the
information found on a serial number label is shown below.
A
A
B
C
D
E
F
1
The product code for the ATS Hardware with ApexPro v4.0 is SAH.
ApexPro™ Telemetry
8-4.
### ## ## #### # #
B C D
Description
1
product code
year manufactured
fiscal week manufactured
production sequence number
manufacturing site
miscellaneous characteristic
Introduction
E F
1-7