Fuses - Mercedes-Benz Vito 111 CDI/BlueTEC Operating Instructions Manual

Fuses

354
If the vehicle is loaded:
X
Vehicles with manual transmission:
engage 1st gear or reverse gear.
X
Vehicles with automatic transmission:
shift the transmission to position P.
X
Turn the key to position 0 in the ignition lock
and remove it.
X
Make sure the parking brake is applied.
X
Lash down the vehicle.
Tow-starting (emergency engine
starting)
Vehicles with automatic transmission
! Do not tow-start vehicles with automatic
transmission. You could otherwise damage
the automatic transmission.
You can find information on jump-starting under
"Jump-starting" (
Vehicles with manual transmission
Before tow-starting:
Make sure that the battery is connected and
R
charged. The ignition cannot be switched on
otherwise and there will be no steering and
braking assistance.
Use a towing bar and attach it to the front
R
Y
towing eye (
Allow the engine and the exhaust system to
R
cool down first.
If the engine does not start after a few sec-
R
onds, try a jump-starting procedure using the
battery of another vehicle (
Tow-starting procedure:
X
Switch on the hazard warning lamps
Y
( page 117).
X
Turn the key to position 2 in the ignition lock.
X
Shift the transmission to neutral.
X
Release the parking brake.
X
Have the vehicle tow-started.
X
Engage second or third gear and release the
clutch slowly. Do not depress the accelerator
pedal.
X
When the engine has been started, immedi-
ately depress the clutch pedal fully and shift
to neutral.
Y
page 349).
page 352) only.
Y
page 349).
X
Stop at a suitable place in accordance with
the traffic conditions.
X
Apply the parking brake to prevent the vehicle
from rolling away.
X
After removing the towing eye, switch off the
hazard warning lamps.
Fuses
The fuse allocation chart and important safety
information on the fuses can be found in the
"Fuse allocation chart" supplement.