Setting The Air Distribution - Mercedes-Benz Vito 111 CDI/BlueTEC Operating Instructions Manual

THERMOTRONIC automatic climate
control
You can set the temperature separately for the
driver's and co-driver's side. In vehicles with
rear-compartment air conditioning, the temper-
ature for the rear can be set additionally. Each
set temperature is automatically maintained at
a constant level.
X
Switch on climate control (
X
To increase or reduce: turn temperature
control : or E clockwise or anticlockwise
Y
( page 135). When doing so, only change the
temperature in small increments starting at
22 †.
The control panel display shows the set tem-
perature for the left and right side at the
respective edge of the display.
Rear-compartment heating or rear-com-
partment air conditioning
Vehicles with the TEMPMATIC air-condi-
tioning system
X
Switch on climate control (
The air conditioning settings for temperature,
airflow and, for rear-compartment air condi-
tioning, also the setting for air distribution are
also applied to the rear-compartment climate
control.
Vehicles with THERMOTRONIC automatic
climate control
X
Switch on climate control (
X
To increase or decrease: press the /
button on the control panel of the automatic
climate control.
The indicator lamp in the / button flashes.
The control panel display shows the second
menu level for the temperature and airflow
setting of the rear-compartment air condi-
tioning system.
X
Turn temperature control : or E anti-clock-
Y
wise or clockwise (
so, only change the rear-compartment tem-
perature in small increments starting at 22 †.
The control panel display shows the temper-
ature set for the rear compartment.
If you do not set a new value within approx.
ten seconds, the control panel display returns
to the first menu level for the automatic cli-
Operating the climate control system
Y
page 136).
Y
page 136).
Y
page 136).
page 135). When doing
mate control settings. The indicator lamp in
the / button remains lit.

Setting the air distribution

TEMPMATIC heating or air-conditioning
system
Air distribution settings
¯ Directs air through the demister vents
P Directs air through the centre and side air
vents
O Directs air through the footwell vents
Regardless of the air distribution selected, air is
always channelled to the side air vents and, for
heating, to the centre air vents. You can adjust
this airflow by opening or closing the side or
Y
centre air vents ( page 156).
Setting the air distribution
X
Switch on climate control (
X
Press the P, O and/or ¯ button.
If the indicator lamp in a button lights up, the
air is directed to the corresponding air vents.
If you press the P button in the heating
control panel, the air distribution to the
demister and footwell vents is closed off first.
If necessary, press the O and/or ¯
buttons once more.
X
Adjust the air vents if necessary
Y
( page 156).
THERMOTRONIC automatic climate
control
Air distribution settings
¯ Directs air through the demister vents
b Directs air through the demister, centre
and side air vents
_ Directs air through the demister, centre,
side and footwell vents
a Directs air through the demister and foot-
well vents
P Directs air through the centre and side air
vents
N Directs air through the centre, side and
footwell vents
O Directs air through the footwell vents
139
Y
page 136).