Display Message - Mercedes-Benz Vito 111 CDI/BlueTEC Operating Instructions Manual

Display messages (vehicles with steering wheel buttons)
Display messages
Wheel sensor(s)
missing
Tyre pressure moni‐
tor inoperative No
wheel sensors
Tyre pressure moni‐
tor inoperative
Vehicle
Display messages
To start engine,
shift to either P
or N
Auxiliary battery
malfunction
Apply brake to dese‐
lect Park (P) posi‐
tion
Risk of rolling
Transmission not in
P
Without changing
gear, consult work‐
shop
Only select Park
(P) when vehicle is
stationary
Possible causes/consequences and M Solutions
There is no signal from the tyre pressure sensor of one or several
wheels. The pressure of the affected tyre is not shown in the display.
X
Have the faulty tyre pressure sensor replaced at a qualified spe-
cialist workshop.
The wheels fitted do not have suitable tyre pressure sensors. The tyre
pressure monitor is deactivated.
X
Fit wheels with suitable tyre pressure sensors.
The tyre pressure monitor is activated automatically after driving for
a few minutes.
The tyre pressure monitor is malfunctioning.
X
Visit a qualified specialist workshop.
Possible causes/consequences and M Solutions
You have attempted to start the engine with the transmission in posi-
tion R or D.
X
Shift the transmission to position P or N.
The auxiliary battery for the transmission is no longer being charged.
X
Visit a qualified specialist workshop.
You have attempted to shift the transmission to position D, R or N
without depressing the brake pedal.
X
Depress the brake pedal.
A warning tone also sounds. The driver's door is open and the trans-
mission is in position R, N or D.
X
Shift the transmission to position P.
X
Secure the vehicle against rolling away (
A warning tone also sounds. You cannot change the transmission
position due to a malfunction.
If transmission position D is selected:
X
Drive to a qualified specialist workshop without shifting the trans-
mission from position D.
If transmission position R, N or P is selected:
X
Consult a qualified specialist workshop.
The vehicle is still moving.
X
Pull over and stop the vehicle, paying attention to road and traffic
conditions.
X
Shift the transmission to position P.
Y
page 177).
277
Z