Mercedes-Benz Vito 111 CDI/BlueTEC Operating Instructions Manual page 167

the temperature in the vehicle interior
R
increasingly deviates from the set value
the system detects moisture on the wind-
R
screen when the air-conditioning system is
switched on
the battery's charge status is too low
R
Vehicles with manual transmission
! Only engage gear when the clutch pedal is
depressed.
The engine is started automatically when you
depress the clutch pedal.
Vehicles with automatic transmission
The engine is started automatically if you:
switch to drive program M (
R
release the brake pedal when in transmission
R
position D or N
switch to transmission position P
R
After shifting from transmission position R to D,
the ECO start/stop function is not available until
the è ECO symbol is shown in the display.
Activating and deactivating the ECO
start/stop function
X
Y
page 170)
Press the è ECO button.
When the indicator lamp in the è ECO
button lights up, the ECO start/stop function
is activated.
When all the conditions for automatic engine
switch-off are fulfilled, the display shows the
è ECO symbol in the status bar
Y
( page 163). The engine is then automati-
cally switched off when the vehicle comes to
a stop.
Driving
165
Z