Display - Mercedes-Benz Vito 111 CDI/BlueTEC Operating Instructions Manual

X
Remove foreign objects from the vicinity of
contact surfaces ; and contact pins : of
the sliding door.
X
Clean contact surfaces ; and contact
pins : with a mild cleaning agent and a soft
cloth.
Do not oil or grease contact plates ; and
contact pins :.
Cleaning the trailer tow hitch
H
Environmental note
Dispose of oily and greasy cloths in an envi-
ronmentally-responsible manner.
! Do not clean the ball coupling with a high-
pressure cleaner. Do not use solvents.
! Follow the additional notes on trailer tow
hitch care (see the manufacturer's operating
instructions).
Ball coupling (example: detachable trailer tow
hitch)
Locking balls
:
Guide pin
;
Ball joint
=
Guide faces
?
Cap
A
Lock
B
Handwheel
C
Clean the ball coupling if it is dirty or corroded.
X
Remove traces of rust, e.g. with a wire brush.
X
Remove dirt with a clean, lint-free cloth or
brush.
X
After cleaning, lightly oil or grease posi-
tions : to ? and the ball coupling mounting
on the vehicle.
X
Treat lock B under cap A and the shaft of
handwheel C with acid- and resin-free oil.
X
Check that the vehicle's trailer tow hitch is
working properly.
You can also have the maintenance work on the
ball coupling and the trailer tow hitch carried out
by a qualified specialist workshop.
Interior
Cleaning the interior
! Observe the following points when wet
cleaning the vehicle interior:
Never use a high-pressure cleaner.
R
Make sure that no liquids enter or are left in
R
gaps or cavities.
Ensure that there is sufficient ventilation
R
when cleaning.
Make sure that the vehicle interior dries
R
completely after cleaning.
Cleaning the display
! For cleaning, do not use any of the following:
alcohol-based thinner or petrol
R
abrasive cleaning agents
R
commercially-available household cleaning
R
agents
These may damage the display surface. Do
not put pressure on the display surface when
cleaning. This could lead to irreparable dam-
age to the display.
X
Switch off the display and let it cool down.
X
Clean the display surface with a commercially
available microfibre cloth and cleaner for
TFT/LCD displays.
X
Dry the display surface using a dry microfibre
cloth.
Care
343
Z