Overview Of Climate Control Systems; Heating Control Panel - Mercedes-Benz Vito 111 CDI/BlueTEC Operating Instructions Manual

Heating control panel

Sets the temperature (
:
z Demists the windscreen (
¤ Switches the rear window heating on/off (
;
_ Sets the air distribution (
=
¯ Demists the windscreen (
h Activates/deactivates air-recirculation mode (
?
K Sets the airflow (
A
z Demists the windscreen (
Information on heating
Below, you can find a number of notes and rec-
ommendations to help you use the heating opti-
mally.
Set the temperature control to the middle
R
level. Only change the temperature in small
increments.
If you wish to heat up the vehicle interior as
quickly as possible, set the temperature con-
trol to the z maximum setting. When the
desired interior temperature has been

Overview of climate control systems

Y
page 138)
Y
page 141)
Y
page 139)
Y
page 141)
Y
page 140)
Y
page 141)
Y
page 142)
Y
page 142)
reached, turn the temperature control back
down in small steps.
Only use the settings for demisting the wind-
R
screen briefly, until the windscreen is clear
again.
Only use air-recirculation mode briefly, e.g. if
R
there are unpleasant outside odours or when
in a tunnel. The windows could otherwise mist
up as no fresh air is drawn into the vehicle in
air-recirculation mode. The indicator lamp in
the h button comes on when the function
is switched on.
133