Table of Contents
Advertisement
A
T
BOUT THE
IGER
Figure 1-1. Front and Rear Panels
Description of Hardware
1000BASE-T Ports
These ports are RJ-45 ports that operate at 10 Mbps, 100 Mbps and
1000 Mbps, full and half duplex. The ports can be connected to
other IEEE 802.3ab 1000BASE-T compliant devices up to 100 m
(328 ft.) away using Category 5 twisted-pair cable.
Each port also supports the IEEE 802.3x auto-negotiation of flow
control, so the switch can automatically prevent port buffers
becoming saturated.
GBIC Slots
The two slots on the switch front panel are for installing optional
5V GBIC transceivers. Note that GBIC transceivers are
hot-swappable. You do not need to power off the switch before
installing or removing a transceiver.
1-2
S
1000
WITCH
Advertisement
Table of Contents
