Status LEDs
The LEDs, which are located on the front panel for easy viewing,
are shown below and described in the following table.
Figure 1-2. Port and System LEDs
LED
Power
RPU
Diag.
Port and System Status LEDs
Condition
On Green
Off
On Green
Off
Flashing Green
On Green
On Amber
A
BOUT THE
Status
Switch is receiving power.
Power off or failure.
Redundant power unit is attached and
is operating in a load-sharing mode.
Power off or failure.
System self-diagnostic test in progress.
System self-diagnostic test successfully
completed.
System self-diagnostic test has failed.
T
S
1000
IGER
WITCH
1-3