Section 1 - Introduction; Overview - Troy-Bilt WindConnect II User Manual

Section 1

Overview

The TROY WindConnect II printer adapter with Bluetooth
on the model purchased) plugs directly into the USB or parallel port of your printer. By using the WindConnect
II, you can conveniently print from a desktop or laptop computer and other devices that use Bluetooth
technology without using a cable. Please refer to the Quick-Install Guide provided in the product package for
hardware setup information.
www.troygroup.com.
This manual covers installation and configuration of the WindConnect II for use with computers, pocket PCs
(PDAs), or mobile phones that have either embedded Bluetooth technology or are equipped to use an external
adapter that uses Bluetooth technology. A troubleshooting section is also provided in the event that your
WindConnect II does not perform as specified.
The WindConnect II supports the following profiles:
The WindConnect II can be used with devices that use Bluetooth technology and support one of these profiles.
WindConnect II Printer Adapter with Bluetooth Technology User's Guide -- Document #40xxx-110 Rev. X3
Serial Port Profile (SPP)
Object Push Profile (OPP)
Hardcopy Cable Replacement Profile (HCRP)
Basic Printing Profile (BPP)
Basic Imaging Profile (BIP)
NOTE: The BPP and BIP profiles are supported on selected printers (refer to the TROY web site at
http://www.troygroup.com).
NOTE: Some sending devices will automatically time out after a few minutes of inactivity. Other sending
devices will keep the connection active until forced to disconnect.
IMPORTANT: Other users will not be able to use the WindConnect II while the connection is active with your
sending device.
®
technology is a wireless print device that (depending
For additional information on this product, visit the TROY web site at
Introduction
1-1