Troy-Bilt WindConnect II User Manual page 34

Section 4
Using the
5. To access the security options for the printer adapter, click on the Device Security tab. To enable security
Configuration
Utility (cont.)
6. From the Discoverability group box, select Discoverable (default) if you want other devices that use
7. To clear all previous
WindConnect II Printer Adapter with Bluetooth Technology User's Guide -- Document #40xxx-110 Rev. X3
features, place a checkmark in the box labeled Enable Device Security. To limit access to your printer that
uses Bluetooth technology, you can choose a PIN (Personal Identification Number) of up to 16 characters in
length. Enter the desired PIN (using either 4, 8, 12, or 16 characters), and then click on Apply to save your
selection. A PIN allows you to limit access to your printer that uses Bluetooth technology by giving the PIN
to a single user or a group of specified users. All users are required to use the same PIN.
Bluetooth technology to find your printer, or select Non-discoverable if you do not want other sending
devices to see your printer.
NOTE: If you are sharing your printer, select "Discoverable" so that other users can find your printer. If you
select "Non-discoverable", your printer will not be visible to anyone, including yourself. In this case, if you
forget the address of your printer, you will not be able to access your WindConnect II and will have to reset the
printer adapter to factory defaults in order to access the device and change its configuration.
link keys, place a
checkmark in the
Clear link keys
checkbox located in
the Device Security
group box, and then
click on Apply to
finish. Clearing all
link keys will require
each device to
authenticate again.
Configuring Your Printer Adapter
4-6