Led Status Indicators - Troy-Bilt WindConnect II User Manual

Section 5
LED Status
Indicators
Power on self test
Ready
No connection or
activity with Bluetooth
technology
Connection with
Bluetooth technology
Activity (RX or TX)
Printer I/O activity/self
test page
Printer adapter error,
Self test failure, Flash
update failure, USB
overcurrent
Failure to communicate
with printer (I/O error)
Configuration/Firmware
update mode
WindConnect II Printer Adapter with Bluetooth Technology User's Guide -- Document #40xxx-110 Rev. X3
State Bluetooth
LED (blue)
Slow Blinking
N/A
Slow Blinking
Solid
Rapid Blinking
N/A
N/A
N/A
N/A
Power/Status LED
(green/amber)
Blinking Green Blinks for the duration of the power on self-test.
Solid Green Self-test passed. Device ready.
N/A Device is waiting for a connection – no
connection is currently established.
N/A Connection established.
N/A Blue LED blinks rapidly during link activity.
Blinking Green USB or 1284 (parallel port) activity.
Blinking Amber Any firmware or hardware failure not covered by
other states.
Solid Amber Printer communication error.
Amber/Green toggle Bi-colored LED toggles while in configuration
mode and while the flash memory is being
reprogrammed.
Troubleshooting
Description
5-7