OPERATING THE BLENDER
Using the Blender
While the blender Power indicator light or
the Pulse mode indicator light is blinking:
- Do not interfere with blade movement.
- Do not remove pitcher lid.
Before operating the Blender, make sure
the pitcher is properly locked onto the
Put ingredients in pitcher and firmly
When finished, press POWER to turn
off. Unplug Blender before removing
IMPORTANT: If blending hot foods or liquids, do not fill to the top of the pitcher,
and operate only on STIR speed. Remove center cap and place towel over lid.
The Blender has five speeds:
Mix, Puree, and Liquify. It also features
Crush Ice and Pulse modes.
Press POWER. The Power indicator
light will flash when ready. Then press
desired speed button for continuous
operation at that speed. The white
indicator light by the selected speed
will stay lit. You may change settings
without stopping by pressing a new
NOTE: The Blender will operate only
when pressing the POWER button (Power
LED will flash) before selecting the desired