OPERATING THE BLENDER
CMD + SHIFT CLICK TO CHANGE COPY
Using PULSE mode
Your Blender offers a PULSE mode, which allows a "Pulse-at-any-speed" feature.
Before operating the Blender, make sure
the pitcher is properly positioned on
NOTE: Pulse mode will not work with the
Crush Ice feature.
Press POWER, then press PULSE.
The indicator lights above the Pulse
button and all five speeds will blink
to indicate that all five speeds are in
the Pulse mode.
When finished, press POWER to turn
off. Unplug Blender before removing
Put ingredients into the pitcher and
firmly place lid.
Press and hold a speed button for the
desired length of time. Both the speed
button and Pulse mode indicators will
stay lit when pulsing. Blending will stop
when Pulse button is released and the
Pulse indicator will resume blinking. To
pulse again at another speed, just press
and hold the desired speed button.