The Barricade includes an LED display on the top for system power and
port indications that simplifies installation and network troubleshooting.
It also provides the following ports on the rear panel:
Figure 2-1. Rear Panel
Item
ADSL Port
Power Inlet
Reset Button
On/Off
switch
LAN Ports
Description
WAN port (RJ-11). Connect your ADSL line to this port.
Connect the included power adapter to this inlet.
Warning: Using the wrong type of power adapter may damage
the Barricade.
Use this button to reset the power and restore the default
factory settings. To reset without losing configuration settings,
see "Reset" on page 4-81.
Use this switch to turn the Barricade ON and OFF.
Fast Ethernet ports (RJ-45). Connect devices on your local area
network to these ports (i.e., a PC, hub, or switch).
H
D
ARDWARE
ESCRIPTION
2-3