SMC Networks SMC Barricade g SMC7904WBRA2 User Manual page 64

PPPoA
Parameter
VPI/VCI
Encapsulation
QoS Class
PCR/SCR/MBS
IP assigned by ISP
IP Address
Subnet Mask
Connect Type
Idle Time (Minute)
Username
Password
Description
Enter the Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) supplied by your ISP.
Select the encapsulation used by ISP from the drop-down
menu.
ATM QoS classes including CBR, UBR and VBR.
QoS Parameters - PCR, SCR and MBS are configurable.
Select Yes if you have a dynamic IP address. Select No if
you have a static IP address.
Enter the IP address provided by your ISP. For dynamic
IP leave this field blank.
Enter the subnet mask address provided by your ISP. For
dynamic IP leave this field blank.
Sets connection mode to Always connected,
Auto-Triggered by traffic or Manual connection. For flat
rate services use Always connected.
Enter the maximum idle time for the Internet connection.
After this time has been exceeded the connection will be
terminated. This setting only applies when the Connect
Type is set to Auto-Triggered by traffic.
Enter user name provided by your ISP.
Enter password provided by your ISP.
C
ONFIGURATION
P
ARAMETERS
4-25