SMC Networks SMC Barricade g SMC7904WBRA2 User Manual page 36

2. In the Command Prompt window, type "IPCONFIG/RELEASE"
and press the ENTER key.
3. Type "IPCONFIG /RENEW" and press the ENTER key. Verify that
your IP Address is now 192.168.2.xxx, your Subnet Mask is
255.255.255.0 and your Default Gateway is 192.168.2.1. These
values confirm that your ADSL router is functioning.
Type "EXIT" and press the ENTER key to close the Command Prompt
window.
Your computer is now configured to connect to the Barricade.
W XP
INDOWS
3-15