SMC Networks SMC Barricade g SMC7904WBRA2 User Manual page 90

RIP
RIP sends routing-update messages at regular intervals and when the
network topology changes. When a router receives a routing update that
includes changes to an entry, it updates its routing table to reflect the new
route. RIP routers maintain only the best route to a destination. After
updating its routing table, the router immediately begins transmitting
routing updates to inform other network routers of the change.
Parameter
General RIP Parameters
RIP mode
Auto summary
Table of current Interface RIP
parameter
Interface
C
ONFIGURATION
Description
Globally enables or disables RIP.
If Auto summary is disabled, then RIP packets will
include sub-network information from all sub-
networks connected to the router.
If enabled, this sub-network information will be
summarized to one piece of information covering
all sub-networks.
The WAN interface to be configured.
P
ARAMETERS
4-51