Sony UP-X898MD Instructions For Use Manual page 21

Item Function
PRT.MENU Prints current settings by menu
list.
PREF. Displays menu to set printout
conditions.
CLEAN.TH Starts head cleaning.
CONFIG. Displays settings for operation.
Settings
MENU:OK Prints by pushing the menu lever.
d)
-BACWRD Select whether the top or bottom of the screen is to be printed
first.
BACW:ON: Starts to print in the reverse direction (from the top
of the screen).
[BACW:OFF]: Starts to print in the normal direction (from the
bottom of the screen).
-INFO Select whether the print conditions are to be printed under image.
[INFO:OFF]: Does not print information.
INFO:ADJ: Prints image quality adjustment value.
INFO:CLK: Prints date and time.
INFO:STR: Prints pathname/file name.
-INVERT Set the printout to either positive printout or negative printout.
INV:NEG: Makes negative printouts.
[INV:POS]: Makes normal printouts.
-MIRROR Prints image inverting right and left.
MIRR:ON: Inverts right and left of image.
[MIRR:OFF]: Does not invert image.
-QTY Set the print quantity.
QTY: [1] -- 10: You can make 1 -- 10 copies of the same printout.
CLEAN:OK Starts the head cleaning by pushing the menu lever.
-AUT.LCK Select whether to lock BRIGHT control and CONTRAST control
automatically.
ALCK:ON: Always lock automatically.
Unlock by pushing and holding the menu lever for three seconds
on STANDBY. The controls are locked after ten seconds of no
operation.
[ALCK:OFF]: Does not lock automatically.
Lock/unlock the controls by pushing and holding the menu lever
for three seconds.
-BEEP Select whether the operation tone sounds. Error tones sound
regardless of the setting.
BEEP:OFF: The operation tone does not sound.
[BEEP:ON]: The operation tone sounds.
-BLANK Adjust the blank space length.
BLANK:L: Lengthens the blank space.
[BLANK:S]: Shortens the blank space.
Adjust the length of the top blank space (BACW:OFF) or the
bottom blank space (BACW:ON).
-CLOCK Set date and time.
Set year: Set by turning the BRIGHT control and pushing the
menu lever when "Y: XXXX" is displayed.
Set month, hour, minute, and second as above.
Reset by shifting the menu lever to the left.
Greenwich Mean Time is set as the default.
-FEED To select the paper feed length to be used after printing.
[FEED:ON]: Feeds extra blank paper between prints.
FEED:OFF: Feeds less paper between prints to conserve paper, or
when printing multiple pictures on the same sheet without
cutting.
More pictures can be printed on one roll when there is only a little
space between printed pictures. Feed the desired length of the
paper to leave a margin, using the FEED button before cutting the
paper.
-RESET Resets the menu items to the default setting. (initialization)
[RESET:OK]: Resets the settings to the default.
Adjustments and Settings Using the Menu
21