Table of Contents
Advertisement
Connections
WARNING
Using this unit for medical purposes
The connectors on this unit are not isolated.
Do not connect any device other than one which
conforms to IEC 60601-1 standards.
When an information technology device or AV device
that uses an alternating current is connected, current
leakage may result in an electric shock to the patient or
operator.
If use of such a device is unavoidable, isolate its power
supply by connecting an isolation transformer, or by
connecting an isolator between the connecting cables.
After implementing these measures, confirm that the
reduced risk now conforms to IEC 60601-1 standards.
Notes
• Turn off the power to each device before making any
connections.
• Connect the AC power cord last.
• Before connecting the unit to the computer, turn off
the unit, computer, monitor, and all peripheral devices
connected to the computer.
• Before connecting the unit to the computer, disconnect
the power cord from the unit. Connect the power cord
to the unit only after connecting the unit and the
computer.
• Follow the connection procedures described in the
computer manual.
• Make sure that the cables are connected securely at
both ends.
• The unit drive software provided with the unit is not
suitable for using the unit connected to a network.
• Printer operation is not guaranteed when connecting
to the computer using the USB cable via a hub.
• Two or more units cannot be connected to a single
computer.
Computer
FS-24
RM-91 remote
USB cable
foot switch
commander unit
(sold
(sold separately)
(sold separately)
separately)
USB flash
drive (sold
separately)
to
to
(USB)
(USB)
connector
connector
to REMOTE
to VIDEO
to VIDEO
to - AC IN
input
output
AC power cord
(sold separately)
Connecting cable
Connecting cable
(BNC y BNC)
(sold separately)
(sold separately)
to wall outlet
to video input
connector
Color/black
and white
video monitor
to video output
connector
Video equipment
Page 13
Hide quick links:
Advertisement
Table of Contents
