Table of Contents
Advertisement
Getting Started
Overview
This unit is a printer that prints images by heating a
thermal head, according to the input image data, and
pressing the head against special thermal printing paper
to print the image on the paper. It features the following
characteristics.
Quiet, high quality, fast printing
• A thin-film thermal head with a built-in high speed
drive IC is equipped, and printing high resolution
images of 12.8 dots/mm is available.
• High quality image (A-7 size single printout) printing
is available in approx. 1.9 seconds per print when
printing at high speed (when "HI" is selected in
"-SPEED" of the "CONFIG." menu).
• Monochrome printing with up to 256 shades of
gradation is available.
• Built-in temperature correction circuits prevent
temperature changes which could cause blurred prints.
Printable from the video equipment or
computer
You can print from the video inputs of both NTSC and
PAL. Also, this unit has a USB connector (type B)
corresponding to the Hi-Speed USB (USB 2.0
compliant), so you can print a digital image from the
computer.
There is no special operation you need to perform to
switch to printing from video equipment or computers.
Image storage to USB flash drive
This unit has a USB connector (type A) corresponding
to the Hi-Speed USB (USB 2.0 compliant), so you can
store a printed image to a USB flash drive.
Easy printer settings using a menu
You can make up the settings to meet your requirements
using a menu. You can store up to three settings as a set
of user settings.
Easy paper loading
Free access to the door panel allows you to drop paper
into the unit for easy loading.
Location and Function
of Parts and Controls
For more details, see the referenced page numbers
enclosed in parentheses ( ).
Front Panel
A ! Power ON/OFF Switch (16, 23, 25, 33)
Press the switch to ON. The back light on the LCD
lights in green.
Note
When the switch is turned off or when turning the
main power off then on again, wait about five
seconds and turn on the unit.
B Printer window display (LCD: liquid crystal
display) (18, 26)
The back light lights in green when the unit
operates normally.
If an error occurs, the back light lights in orange
and a corresponding alarm message is displayed.
During menu operations, menu items and settings
are displayed.
C Menu lever (23, 33)
Use to make menu operations.
D
CONTRAST control (29)
Adjust the contrast of the printouts.
E
BRIGHT (brightness) control (29)
Adjust the brightness of the printouts.
F
FEED button (17, 29)
Hold down to feed paper.
While a print job is in progress, press to cancel the
print job.
Overview / Location and Function of Parts and Controls
11
Hide quick links:
Advertisement
Table of Contents
