Registering Menu Settings - Sony UP-X898MD Instructions For Use Manual

"BACW:OFF," which is the default setting, is
displayed on the LCD. "BACW:OFF" is the
currently selected setting.
In this menu operation, you will change the setting
to "BACW:ON."
7
Display "BACW:ON" by shifting the menu lever
up, and then push the menu lever.
"BACW:ON" is registered as the printing direction.
"-BACWRD" is displayed on the LCD.
Note
If about 20 seconds elapse without making any
menu operation after you have displayed the menu
item or setting, the display returns to "READY" on
the LCD and the unit exits the menu mode. In such
a case, the setting of "-BACWRD" is not changed.
To cancel the setting
Go back to step 5 or 3 by shifting the menu lever to the
left in step 7.
To continue menu operations
Make settings by repeating steps 3 to 7.
To end the menu operations
Display "READY" by shifting the menu lever to the left
after step 7.
The unit exits the menu mode.
Menu lock function
If the message "LOCK" is displayed and you hear the
alarm sound when you push the menu lever, the menu
lever is disabled because the menu operation function is
locked. If you want to perform a menu operation, contact
the nearest authorized dealer.
24
Adjustments and Settings Using the Menu

Registering Menu Settings

You can store up to three sets of settings made using the
menu, and you can load the desired setting when needed.
The unit retains these settings even if you turn off the
power.
Note
When you use the unit for the first time after you
purchase it, default settings are registered in all three of
the stored selections.
Registering new settings
1
Make all of the required settings.
2
Display "CONFIG." by shifting the menu lever up
or down, and then push the menu lever or shift it to
the right.
The unit enters the menu in which you can make
setting for printer operation.
3
Display "-SAVE" by shifting the menu lever up or
down, and then push the menu lever or shift it to the
right.
The number is displayed, such as "SAVE:1."
4
Select the desired number by shifting the menu
lever up or down, and then push the menu lever.
The value set in step 1 is registered to the number
selected.
Loading the desired settings
You can load the desired settings and make printouts
with the loaded settings.
1
Confirm that "READY" is displayed on the LCD,
and then push the menu lever.
2
Display "CONFIG." by shifting the menu lever up
or down, and then push the menu lever or shift it to
the right.
3
Display "-LOAD" by shifting the menu lever up or
down, and then push the menu lever or shift it to the
right.
The number is displayed, such as "LOAD:1."
4
Select the desired number of setting content by
shifting the menu lever up or down, and then push
the menu lever.
The setting of the number selected is loaded.
When you change the loaded settings
The unit operates according to the changed settings. In
this case, the unit operates according to these settings