9.
The Upgrade Firmware window appears. Click the Download button to continue.
10. Wait for the firmware upgrade to complete. The Progress column in the Detail Status Area shows the
status of the upgrade.
The program erases the old image (below left), then writes the new image (below right).
11. When the new image is loaded, the Flash program restarts the unit. Verify the following:
•
In the Summary Status box, the Number of Units should be 0 under Failed (above right).
•
In the Detail Status box, Running should appear in the Progress column—this indicates that the BCB
has been restarted successfully.
| Liebert® LDMF™ Distribution Monitoring User Manual |
Vertiv
™
Progress
Column
42
Failed = 0