Download
Share
Print this page
Meyer PV Series Installation And Instructional Manual
  1. Manuals
  2. Brands
  3. Meyer Manuals
  4. Spreader
  5. PV Series
  6. Installation and instructional manual

Meyer PV Series Installation And Instructional Manual

Hide thumbs

Advertisement

Quick Links

INSTALLATION AND INSTRUCTIONAL MANUAL
PV SERIES
PV SERIES
MODELS LISTED IN THIS BOOKLET
GAS-DRIVEN (HONDA AND BRIGGS & STRATTON)
HYDRAULIC
BASE LINE
xxxxx-xxx-xx
month/day/year
00108-760-01-REV-B
Page 1
OCTOBER, 2013

Advertisement

loading
Need help?

Need help?

Do you have a question about the PV Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Meyer PV Series

Summary of Contents for Meyer PV Series

  • Page 1 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES MODELS LISTED IN THIS BOOKLET GAS-DRIVEN (HONDA AND BRIGGS & STRATTON) HYDRAULIC BASE LINE xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 1 OCTOBER, 2013...

  • Page 2: Table Of Contents

    INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES INDEX SAFETY ................3-4 INSTALLATION INSTRUCTIONS ......... 5-9 WIRELESS INSTRUCTIONS ......... 10-18 HYDRAULIC SPECIFICATIONS ......... 19-20 SPREADER OPERATION ..........21-22 MAINTENANCE ..............25-89 PARTS ................25-89 NAME PLATE INFORMATION ......... 90 WARRANTY ..............

  • Page 3: Safety

    INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES THE BEST SAFETY DEVICE IS A CAREFUL OPERATOR SAFETY ALERT SYMBOL ATTENTION! THIS SYMBOL MEANS BECOME ALERT! YOUR SAFETY IS INVOLVED! PLEASE READ AND UNDERSTAND COMPLETELY BEFORE DO- ING! SAFE EQUIPMENT INSTALLERS and OPERATORS: turn off all power before performing any service operations •...
  • Page 4 Connect the negative battery terminal to the battery hold down post. When finished, make sure all INSTALLATION AND INSTRUCTIONAL MANUAL wires are away from moving parts and lower engine shroud. PV SERIES PV SERIES Plug cable from spreader into socket mounted on truck.
  • Page 5 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ENGINE COVER PROP ROD INSTRUCTIONS WARNING Never operate machine with engine shroud in the upright position. Never clim To prevent injury extreme caution must be used when opening, closing, or working under or near the engine while the engine is operating or capable of being operated.

  • Page 6: Installation Instructions

    INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES InstallatIon InstructIons cEntEr HIGH Mount stoP laMP (cHMsl) ElEctrIcal connEctIons For auXIlIarY cHMsl: 1. Use high quality butt connectors and shrink wrap on WarnInG all electrical splice connections. Wire should be routed and secured to protect against abrasion, sharp edges, and excessive movement.
  • Page 7 INSTALLATION INSTRUCTIONS: CAUTION! The PV Series Spreader can be mounted and stored as a single unit. The PV Series Spreader will mount on most medium or heavy-duty pickup trucks as well ENSURE THE SPREADER CANNOT TIP WHEN THE SPIN- as 1 ton trucks (with optional extended spinner).
  • Page 8 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES OPTIONAL HOLD-DOWN KIT Part No. 62562 (00002-306-00) ITEM PART NUMBER QTY . DESCRIPTION 62602 04068-038-00 Ratchet/Strap 62807 04048-504-02 Bolt, 1/2” Eye 20307 04003-804-06 Locknut, 1/2-13 Esna ZP 62604 04003-801-11 Nut, 1/2-13 Hex ZP...
  • Page 9 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES OPTIONAL HOLD-DOWN KIT Part No. 62562 (00002-306-00) ITEM PART NUMBER QTY . DESCRIPTION 62602 04068-038-00 Ratchet/Strap 62807 04048-504-02 Bolt, 1/2” Eye 20307 04003-804-06 Locknut, 1/2-13 Esna ZP 62604 04003-801-11 Nut, 1/2-13 Hex ZP 62605 04004-002-16 Flatwasher, 3/4"...

  • Page 10: Spreader Operation

    INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES sPrEaDEr oPEratIon Standard Wireless throttle control Button Functions (Sequence of Operations) stop choke / throttle Fast start conveyor throttle slow A. ON/Off System power activated (ready to F. TO TURN ENGINE OFF (With or without conveyor start).
  • Page 11 The Meyer Wireless Controller comes factory programmed. That means matching the Base Unit to the Transmitter has been done by Meyer Products . This gives a matched (1 of 16 million combinations @ 418MHz) interface between the Transmitter and Base Unit. See Figures 1 & 2 for Transmitter button assignments.
  • Page 12 Transmitter button is pressed). If Transmitter buttons are not working, repeat steps 3 – 8 or see the Trouble shooting directions. 8. When Transmitter buttons are functioning properly, re-assemble the Cover on the Base Unit with the (4) screws. Your Meyer Products Wireless Controller is now ready to use! xxxxx-xxx-xx month/day/year...
  • Page 13 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES Meyer Products Variable Speed Wireless controller For use with Electric Packages How it Works: The Variable speed Wireless DC Motor Controller provides RPM control for a single, 2 pole DC motor that can output 180 amps for up to 5 seconds and a continuous amperage of up to 80 amps.
  • Page 14 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES OPERATION: Button #7 (open button) Button #8 (open button) Numbered buttons control speed Button #1 ( on) VARIABLE SPEED TRANSMITTER Shown above is a typical transmitter for wireless operation of a 12VDC motor. The button functions are as follows: 1.
  • Page 15 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES button. The red LED will begin to flash for 15 seconds. Take the Transmitter while the red LED is flashing and firmly depress the ON button within the 15 seconds. Now the unique address of the Transmitter will only be recognized by that matched receiver.
  • Page 16 Transmitter button is pressed). If Transmitter buttons are not working, repeat steps 3 – 8 or see the Trouble shooting directions. 8. When Transmitter buttons are functioning properly, re-assemble the Cover on the Base Unit with the (4) screws. Your Meyer Wireless Controller is now ready to use! xxxxx-xxx-xx month/day/year...
  • Page 17 “red” LED on the Base Unit will light-up. 6. Meyer Products has no control over the intended usage of this product. Because of that , Meyer Produtcs offers no written or expressed liability as to how this product is used.
  • Page 18 A. DO NOT DISCONNECT THE BATTERY (CABLES/TERMINALS) WHEN THE ENGINE /MOTOR IS RUNNING. This could disable or permanently damage the Base Unit. For further technical assistance please contac t Meyer Products at 216-533-6512 or visit us at www.meyerproducts.com to download updated Wireless Controller Instructions.
  • Page 19 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES sInGlE FloW control ValVE DUAL FLOW VALVE/STAND 61190 INSTALLATION INSTRUCTIONS IMPORTANT: A pipe joint sealant compatible with hydraulic oil must be applied to all screw fittings. (Teflon Tape Sealant Is Not Recommended) FLANGE PLATE...
  • Page 20 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES HYDRAULICS WARNING LEAKING HIGH PRESSURE FLUIDS CAN INJECT THEMSELVES UNDER THE SKIN OF PERSONS NEAR A LEAK, CREATING GRAVE MEDICAL RISKS. TAKE CARE TO AVOID EXPOSURE TO HIGH PRESSURE FLUIDS. 1 . Hydraulic components should be kept as clean as possible during assembly operations.
  • Page 21 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES SPREADER OPERATION A. Start the engine and engage the clutch. The amount of material spread, depends on engine speed and gate opening. Decreasing RPM and/or gate height will decrease amount spread; the inverse holds true also.
  • Page 22 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES SPREADER OPERATION A. Start the engine and engage the clutch. The amount of material spread, depends on engine speed and gate opening. Decreasing RPM and/or gate height will decrease amount spread; the inverse holds true also.
  • Page 23 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ENGINE COVER PROP ROD INSTRUCTIONS WARNING To prevent injury extreme caution must be used when opening, closing, or working under or near the engine Never operate machine with engine shroud in the upright position. Never clim while the engine is operating or capable of being operated.

  • Page 24: Maintenance

    INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES MAINTENANCE WARNING DO NOT ATTEMPT TO LIFT THE SPREADER BY THE CENTER LIFT OR CORNER LIFT HOOKS WITH MATERIAL IN THE SPREADER. BEFORE BEGINNING ANY MAINTENANCE ON SPREADER, DISCONNECT SPREADER BATTERY LEADS. Grease idler bearings on idler shaft takeup assembly, outboard bearing on gearbox output shaft, and lower spinner bearing every ten hours of operation.
  • Page 25 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES BASE LINE PV SERIES DETAIL, IDLER ASSEMBLY SCALE 0.250 xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 25 OCTOBER, 2013...
  • Page 26 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 26 OCTOBER, 2013...
  • Page 27 00122- 00122- 00122- 04003- 04607- NOTE: 04003- 1. ITEM #7 MUST BE PLACED INTO BASE LINE PV SERIES 04111- PLASTIC BAG AND PACKED INTO HOPPER FOR SHIPPING. ASSEMBLY 04009- 2. ITEM #72 MUST BE PACKED INTO 04003- HOPPER FOR SHIPPING.
  • Page 28 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES BASE LINE PV SERIES DECAL CENTERED ON BACK OF HOPPER 3.500 1.000 1.000 1.000 1.000 .500 INSTALL ITEM #89 WITH VERTEX OF BEND POINTING TOWARDS INSIDE OF HOPPER 04003-806-XX NUT, 5/16" SER FLANGE 04003-032-XX BOLT, 5/16"...
  • Page 29 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 29 OCTOBER, 2013...
  • Page 30 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 30 OCTOBER, 2013...
  • Page 31 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES BASE LINE PV SERIES TOP OF SHROUD INSIDE OF SHROUD FINGERS OF ITEM #63 MUST BE COMPLETELY THRU ITEM #40 TOR & EMBLY DETAIL, PROP ROD CLAMP ASSEMBLY SCALE 1.125 8.0 M 20.0 M...
  • Page 32 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year PAGE30 00108-760-01-REV-B Page 32 OCTOBER, 2013...
  • Page 33 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES BASE LINE PV SERIES BOTH SIDES OF CHAIN TAKEUP MUST BE ADJUSTED EVENLY TOP OF SHROUD INSIDE OF SHROUD EM #63 PLETELY DETAIL, PROP ROD 8.0 MIN POINT WHERE CHAIN CLAMP ASSEMBLY 20.0 MAX...
  • Page 34 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES BASE LINE PV SERIES ITEM PART NUMBER DESCRIPTION 62690 NUT, 1/4” SER FLANGE 62189 BOLT, 1/4” X 3/4” HH 64415 RETAINER, CLUTCH 62268 COVER, CLUTCH 62752 BOLT, 5/16 X 3/4 HH 62944 WIRE, REM. BATT. NEGATIVE...
  • Page 35 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES BASE LINE PV SERIES ITEM PART NUMBER DESCRIPTION 61176 CLUTCH, ELECTRIC 61161 PULLEY, DRIVEN 62354 WIPER, CHAIN 61174 PIN, CONNECTOR W/ COTTER 62270 BAR, PIVOT 62746 BOLT, 3/8” X 3/4” CA SS...
  • Page 36 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES BASE LINE PV SERIES ITEM PART NUMBER DESCRIPTION 64411 HOLDER, NYLON TIE 62273 BOLT, 5/16” X 1 1/2” HH 64164 COVER, FEEDGATE HANDLE 61201 KEY, WOODRUFF 62813 BOLT, 3/8” X 1 1/4” CA 00108-760-01 P, INSTR.
  • Page 37 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES BASE LINE PV SERIES ITEM PART NUMBER DESCRIPTION 63310 NUT, 5/16” SER FLANGE 63305 BOLT, 5/16” X 3/4” CA 64405 FORM, CHAINSHIELD 64406 TERMINAL, 1/4” RING 64407 TERMINAL, 5/16” RING 64408 WIRE, 12 GA BLACK 0.75...
  • Page 38 INSTALLATION AND INSTRUCTIONAL MANUAL TABD PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 38 OCTOBER, 2013...
  • Page 39 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES BASE LINE PV SERIES ITEM PART NUMBER DESCRIPTION 22230 FLATWASHER, 3/8” U.S.S. SS 62006 DECAL, DANGER 62007 DECAL, CAUTION 62685 LOCKWASHER 3/8 INT/EXT TOOTH 63406 Y, SPINNER SHAFT 63205 BOLT, 3/8-16 X 3/4” SS...
  • Page 40 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 40 OCTOBER, 2013...
  • Page 41 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 41 OCTOBER, 2013...
  • Page 42 INSTALLATION AND INSTRUCTIONAL MANUAL & U WIPER MUST BE ADJUSTED TO PV SERIES ADEQUATELY CLEAN CHAIN BARS ITEMS NOT STANDARD PV MODEL 00122-073-01 INSTR. MANUAL SEE B/M 04049-199-00 04540-003-00 DETAIL, IDLER ASSEMBLY SCALE 0.250 04111-052-00 04616-119-00 HARN 00122-181-XX 04525-012-XX 04616-101-00...
  • Page 43 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES STANDARD PV MODEL 04004-001-XX LOCKWA 00108-771-00 04138-017-00 DECAL CENTERED ON 04070-020-00 BACK OF HOPPER. 04003-032-04 SEE B/M 3.500 1.000 1.000 1.000 1.000 SEE B/M 04076-100-00 04067-033-00 04067-032-00 .500 04604-004-01 04045-022-00 PIN, CO...
  • Page 44 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 44 OCTOBER, 2013...
  • Page 45 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 45 OCTOBER, 2013...
  • Page 46 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES STANDARD PV MODEL BOTH SIDES OF CHAIN TAKEUP CLUTCH GROUND WIRE, MUST BE ADJUSTED EVENLY. ATTACH TO SAME SOLENOID MTG. BOLT AS ITEM #95 POINT WHERE CHAIN CONTACTS FLANGE 8.0 MIN ON LONGITUDINAL 20.0 MAX DETAIL, CHAIN TENSION SCALE 0.250...
  • Page 47 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES STANDARD PV MODEL SECURE THIS LABEL TO ITEM #69 WITH ITEM #93. THIS LABEL IS SUPPLIED WITH ITEM #31 (ENGINE) CLUTCH GROUND WIRE, ATTACH TO SAME SOLENOID CAUTION MTG. BOLT AS ITEM #95...
  • Page 48 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES STANDARD PV MODEL ITEM PART NUMBER DESCRIPTION 64066 ENGINE, 10.5 HP B &S W / VR 63171 ENGINE, HONDA W/DECALS 62187 NUT, 1/4-20 SER FLANGE 62690 NUT, 1/4-20 SER FLANGE ss 20003 BOLT, 1/4-20 X 3/4 HH...
  • Page 49 SEE ENGINE MANUAL 62715 GROMMET, MTG 62364 CABLE, LIGHT POWER 62657 BOLT, 3/8-16 X 4” CA 62656 TRIM, VINYL 63295 DECAL, SERIAL NUMBER (Meyer) 62768 DECAL, GASOLINE ONLY 62009 DECAL, DANGER 62691 PIN, 1/8” X 1” COTTER SS 20353 FLATWASHER, 3/8” 22230 FLATWASHER, 3/8”...
  • Page 50 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES STANDARD PV MODEL ITEM PART NUMBER DESCRIPTION 64164 COVER, FEEDGATE HANDLE 64084 HARNESS, B &S W / CAPACITOR 63843 A, LIFT REAR FORKLIFT PV 63131 ASSY, GROUND WIRE SEE PARTS TABLE P, ASSY SPNR 14 GA 62183 TIE, NYLON 5 1/2”...
  • Page 51 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES STANDARD PV MODEL ITEMS NOT SHOWN ITEM DESCRIPTION PART NUMBER 64401 A, WIRELESS REMOTE PV 00108-760-01 P, INSTR MANUAL PV 62768 DECAL, GASOLINE ONLY 63880 OIL, 5W30 MOTOR SEE ENGINE MANUAL 62643...
  • Page 52 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES INSTALLATION, OPERATION AND PARTS MANUAL POLYHAWK PV SERIES DETAIL, WIRING & THROTTLE ASSEMBLY BRIGGS & STRATTON ACTUATOR 8 9 10 11 12 ITEM DESCRIPTION QTY. PART NUMBER ITEM PART NUMBER QTY. DESCRIPTION 62720 LINKAGE,THROTTLE 62646 SCREW,#10-32x5/16”PPHMACHINE 00117-410-00...
  • Page 53 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES INSTALLATION, OPERATION AND PARTS MANUAL POLYHAWK PV SERIES DETAIL, WIRING & THROTTLE ASSEMBLY HONDA ACTUATOR 1 2 3 ITEM DESCRIPTION QTY. PART NUMBER 62649 SCREW, #8-32 X 3/4” PHIL RD SS ITEM PART NUMBER QTY.
  • Page 54 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES WIPER MUST BE ADEQUATELY CLE SEE DETAIL, CHAIN TENSION HYDRAULIC PV MODEL DETAIL, IDLER SCALE 0.2 ISO VIEW SCALE 0.100 xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 54 OCTOBER, 2013...
  • Page 55 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 55 OCTOBER, 2013...
  • Page 56 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 56 OCTOBER, 2013...
  • Page 57 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES DETAIL ZERK IN BEARING TO AIM FORWARD & UPWARD 04111-05 HYDRAULIC PV MODEL 04111-05 04010-01 04003-03 SEE DETAIL, MOTOR ASSEMBLY 04003-80 04003-03 04003-03 00122-18 04525-01 04009-00 04003-80 04003-00 WIPER MUST BE ADJUSTED TO...
  • Page 58 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES HYDRAULIC PV MODEL DETAIL, MOTOR ASSEMBLY ZERK IN BEARING TO AIM FORWARD & UPWARD 04111-053-00 IDLER COVER 04111-052-00 COVER, FEEDGATE HANDLE 04010-016-01 PIN, COTTER SS SEE/ 04003-032-04 BOLT, 5/16" X 1" CA SS SEE DETAIL, MOTOR...
  • Page 59 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES HYDRAULIC PV MODEL ITEM DESCRIPTION PART NUMBER 20305 LOCKNUT, 3/8” NYLON 63294 FORM, FEEDGATE HANDLE 64388 FORM, FEEDGATE, HANDLE S3 00108-760-01 P, INSTR. MANUAL PV 62657 BOLT, 3/8” X 4” CA CHAINSHIELD, PV...
  • Page 60 BOLT, 5/16” X 3/4” CA SS FORM, FLOOR PV SEE PARTS TABLE 62572 DECAL, MOTOR 62009 DECAL, DANGER 63295 DECAL, SERIAL NUMBER (MEYER) 63156 DECAL, LOGO, MEYER 61174 PIN, CONNECTOR W/ COTTER PIN 62270 BAR, PIVOT 63817 BAR, PIVOT SS...
  • Page 61 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES HYDRAULIC PV MODEL ITEMS NOT SHOWN ITEMS PART NUMBER DESCRIPTION PART NUMBER P, ASSY, SPINNER HYD. SEE PARTS TABLE SEE PARTS TABLE INSIDE UNIT FOR SHIPPING. 63843 00122-181-01 A, LIFT REAR FORKLIFT...
  • Page 62 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PARTS LIST FOR HYDRAULIC MOTOR 60324 (04101-035-00) PARTS LIST ITEM PART NUMBER QTY. DESCRIPTION 20644 04101-035-01 Screw, 5/16" - 24 x 7/8" —————— —————— Seal 62118 04101-102-02 Flange, Mounting (4 Bolt) —————— —————— —...
  • Page 63 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ELECTRIC PV MODEL POINT WHERE CHAIN 8.0 MIN CONTACTS FLANGE 20.0 MAX ON LONGITUDINAL BOTH SIDES OF CHAIN TAKEUP MUST BE ADJUSTED EVENLY DETAIL, CHAIN TENSION SCALE .250 (8) PLACES ISO VIEW SCALE 0.088...
  • Page 64 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 64 OCTOBER, 2013...
  • Page 65 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ELECTRIC PV MODEL 04003-80 04003-00 WIPER MUST BE ADJUSTED TO 04607-02 ADEQUATELY CLEAN DRAG CHAIN 1.000 00123-45 5.000 4.000 1.000 1.000 1.000 04009-00 04111-05 04605-15 04010-01 04003-03 04049-04 .500 00122-36 04003-03 00119-89...
  • Page 66 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 66 OCTOBER, 2013...
  • Page 67 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 67 OCTOBER, 2013...
  • Page 68 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 68 OCTOBER, 2013...
  • Page 69 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 69 OCTOBER, 2013...
  • Page 70 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES ELECTRIC PV MODEL 64448 P, Pv358 50 16g S2 Elec Dm Item Component Description Weld, Pv358 50” Hop 16g S2 Dm 64454 Sub-Y, Gearbox 63410 Bolt, 3/8-16 X 1-1/4 Ca Ss 64455 Form, Guard, Conveyor, Pv...
  • Page 71 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ELECTRIC PV MODEL Form, Floor 8’ Pv 16g S2 64465 Cap, Idler 64064 Bolt, 5/16-18 X 3/4 Ca Ss 62640 nut, 5/16” flange 6 33 1 0 Key, 3/16” Sq. X 1”...
  • Page 72 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 72 OCTOBER, 2013...
  • Page 73 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ELECTRIC PV MODEL 2.000 .500 APPLY ITEM #23 AROUND HAND HOLD ITEM #4 TO BE CENTERED ON THIS SURFACE. xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 73 OCTOBER, 2013...
  • Page 74 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES ELECTRIC PV MODEL 1/4-20 X 1/2" BOLT ONLY (ALL FOUR HOLES), LONGER BOLT WILL CAUSE DAMAGE TO SPINNER MOTOR. 04607-007-00 TIE, NYLON CABLE 04093-021-00 TRIM, VINYL 04003-001-XX BOLT, 1/4" X 1/2" HH 04638-093-00 NUT, WIRE...
  • Page 75 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ELECTRIC PV MODEL WHITE WIRE BLACK WIRE BLACK WIRE RED WIRE RE TO H ITEM E DURING xxxxx-xxx-xx month/day/year WHERE USED MATERIAL: SEE TABLE ON SHEET 1 DO NOT SCALE DRAWING *********************...
  • Page 76 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES ELECTRIC PV MODEL Y, Spinner Pv Su Elect 16g S2 6 44 6 7 Item Component Description Weld, Spin Pv Su Elect 16g S2 64476 Decal, Caution 62007 Decal, Danger (Spinner) 62006 Decal, Swing Up Spinner...
  • Page 77 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES ELECTRIC PV MODEL A, Lift Rear Forklift Pv Cs A, Lift Rear Forklift Pv Cs 63843 Item Component Description Brkt, Fork Rh Cs 63839 Brkt, Fork Lh 7g Cs 63841 Bolt, 3/8-16 X 1 Hh Ss...
  • Page 78 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 78 OCTOBER, 2013...
  • Page 79 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 79 OCTOBER, 2013...
  • Page 80 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV PARTS LISTING TABLE PV HOPPERS PART NUMBER PART NUMBER DESCRIPTION 64421 00115-156-40 WELD, PV358 50” HOPPER 14GA CS 63823 00115-156-32 WELD, PV358 50” HOPPER 14GA S2 63293 00115-156-25 WELD, PV358 50” HOPPER 14GA S3 HYD...
  • Page 81 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES PV PARTS LISTING TABLE CONTINUED PV FLOOR PART NUMBER DESCRIPTION 64432 FORM, FLOOR, 8’ PV 14GA CS 63836 FORM, FLOOR, 8’ PV 14GA S2 64434 FORM, FLOOR, 9’ PV 14GA CS 64435 FORM, FLOOR, 9’...
  • Page 82 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES SUPERIOR GEARBOX ASSEMBLY 17, 18 1 13 5, 7 Section A-A 7, 6 Notes: 1. Gear Ratio is: 20:1 2. Torque 3/8-16 Capscrews Section B-B (20, 21) to 35-40 ft. lbs. xxxxx-xxx-xx month/day/year 00108-760-01-REV-B...
  • Page 83 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES PARTS LIST FOR SUPERIOR GEARBOX ASSEMBLY 62902 After 11/4/02 ITEM PART NUMBER QTY. DESCRIPTION 62903 04132-113-01 Gear, Worm, LH 20:1 62904 04132-113-02 Casting, Machined 62905 04132-113-03 Casting, Machined Thru 62906 04132-113-04 Gear, Worm 20:1 LH 1/4 Keyway...
  • Page 84 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES SHORT SPINNER ASSEMBLY 18 REF. 17 REF. DANGER CAUTION DETAIL - A 12 - 13 xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 84 OCTOBER, 2013...
  • Page 85 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES PARTS LIST FOR SPINNER ASSEMBLY SHORT - PARTS ONLY (ORIGINAL VERSION OF STANDARD) PARTS LIST ITEM PART. NO. QTY. DESCRIPTION 62504 00002-296-01 Short (Steel) Spinner Assy. 62512 00002-296-05 Short (Steel) W/Poly Disc.
  • Page 86 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES INTERMEDIATE - STANDARD SPINNER ASSEMBLY 18 REF. 17 REF. DANGER CAUTION DETAIL - A 12 - 13 xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 86 OCTOBER, 2013...

  • Page 87: Parts

    INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES PARTS LIST FOR EXTENDED SPINNER ASSEMBLY INTERMEDIATE - STANDARD (NEW) PARTS LIST ITEM PART. NO. QTY. DESCRIPTION 62929 00002-296-13 Standard (Steel) W/Poly Disc. 62930 00002-296-14 Standard (304SS) Spinner Assy. 62931 00119-091-01 • Weld, Spinner Frame (Carbon Steel)
  • Page 88 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES EXTENDED SPINNER ASSEMBLY DANGER CAUTION 16 REF. 17 REF. DETAIL- A DETAILS - A 12 - 13 xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 88 OCTOBER, 2013...
  • Page 89 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES PV SERIES PARTS LIST FOR EXTENDED SPINNER ASSEMBLY EXTENDED - PARTS ONLY PARTS LIST ITEM PART. NO. QTY. DESCRIPTION 62505 00002-296-02 Extended (Steel) Spinner Assy. 62513 00002-296-10 Extended (Steel) W/Poly Disc. 62507 00002-296-07 Extended (304SS) Spinner Assy.

  • Page 90: Name Plate Information Warranty

    XXXXXX Description: P, SJDS - MEYER SPREDER Part Number: XXXXX Serial Number: XXXXX CALL YOUR AUTHORIZED MEYER PRODUCTS DEALER FOR PARTS AND SERVICE MEYER PRODUCTS (216) 486-1313 FAX (216) 486-9775 email: warranty@meyerproducts.com NOTICE: INSTRUCTIONAL MATERIAL AND PARTS LISTS INCLUDED IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTICE.
  • Page 91 SPREADER ONE YEAR WARRANTY Meyer Products (“Meyer”) warrants to the original purchaser only that it will repair, or, at the sole option of Meyer, replace any part of the new Meyer covered product which proves to be defective in workmanship or material under normal use for a period of one year from the date of delivery to the original purchaser.
  • Page 92 INSTALLATION AND INSTRUCTIONAL MANUAL PV SERIES SEL INSTALLATION AND OPERATING INSTRUCTION MANUAL MEYER PRODUCTS, LLC 18513 EUCLID AVE. CLEVELAND, OHIO 44112-1084 PHONE: (216) 486-1313 FAX: (216) 486-9775 email:warranty@meyerproducts.com website: www.meyerproducts.com IMPORTANT INFORMATION ENCLOSED xxxxx-xxx-xx month/day/year 00108-760-01-REV-B Page 92 OCTOBER, 2013 PaGE 38 WWW.MEYERPRODUCTS.COM...