Siemens SENTRON PAC2200 Product Manual page 71

"Extended" parameter
"Password" parameter
The write access to the device settings can be protected by means of a password.
As soon as the password has been entered once for the device, it is not requested again for
as long as the device is still in the "Settings" menu.
Display
Communication
Password
Note
If you have forgotten the password, please contact Technical Support. You will receive a
new password from them.
"Reset" parameter
Factory settings
Communication settings
Execute
Note
The reset must be confirmed by selecting the "Execute..." field. Otherwise the device reset is
not executed.
PAC2200
Manual, 05/2018, L1V30415167B-02
No: Password protection deactivated
Yes: Write access is password protected using keys on display
(default setting: No)
No: Password protection deactivated
Yes: Write access is password protected by means of communication
(default setting: No)
Password policy four-digit number between 0000 ... 9999
(default setting 0000)
All device settings and measured values except the communica-
tion parameters and energy secondary values are reset to the as-
delivered condition.
No: Not active
Yes: active
All communication settings are reset to the as-delivered condition.
No: Not active
Yes: active
Confirmation of the reset
Commissioning
6.3 Parameterizing the device
69