Siemens FDOOT221 Technical Manual page 123

Use as Parameter set
No.
Neural fire 2
detector
4
(FDOOT)
5
6
7
0 (ES ≥13) High Compensation
0 (ES <13) Insensitive
8
9
Wide- 0
spectrum
1
smoke
detector
2
(FDO)
3
Heat detector 0...4
(FDT)
Building Technologies
Fire Safety
Collective maximum current connection factor/alarm verification
(FDOOT241-9)
The default parameter set (parameter set 0) is set in all fire detectors when
delivered.
Maximum
current
Designation
connection
factor for
ES < 30
Robust
2
Balanced
Suppression
Fast Response 2
High Compensation 2
–
1.5
High Suppression –
High Sensitive Fast –
Universal 2
Universal
Robust
Sensitive 2
All parameter sets 2
For CS1115, the maximum current connection factor values in the column apply for ES <30.
1
Different connection factors due to the different measuring cycles.
2
54BTechnical data FDOOT221, FDOOT241-x / -Ax
Maximum Alarm verification
current on control panel
connection permitted with
factor for detector ES < 13
ES ≥ 30 (verification time at
1
the control panel
≥50 s)
1.5 No
1.5 Yes
1.5 No
2
1.25 –
2
– No
1.5 –
1.5 –
1.5 No
1.5 Yes
1.5 No
7BSpecifications
8
Alarm verification on control
panel permitted with detector
ES ≥ 13 (verification time at the
control panel ≥ 30 s)
Yes
Yes
Yes
Yes
–
Yes
Yes
Yes
Yes
Yes
123 | 138
007004_t_en_--
2015-11-04