Nc304, Nc304Lcd, Nc305Lcd Master Station Controls And Indicators; System Operating Instructions; Figure 1-Nc304Lcd Master Station; Figure 2-Nc305Lcd Master Station - TekTone Tek-CARE NC300II Operation, Installation And Service Manual

System Operating Instructions

NC304, NC304LCD, NC305LCD Master Station Controls and Indicators

Figure 1—NC304LCD
Master Station
(NC304 controls are
the same, but device
has no LCD display)
Figure 2—NC305LCD Master Station
2 • IL715 Tek-CARE NC300II Manual
®
This section provides complete operating instructions for all Tek-CARE
System Equipment, as well as drawing references for use in locating and describing all
controls and indicators. System operators must read the following operating instructions
concerning system equipment and terms used in conjunction with the equipment.
Function Buttons: These buttons control most system functions and are described below.
TALK (White)
ALPHA (White)
RESET (Black)
STAT (Red)
FOLLOW (Orange)
AIDE (Yellow)
NURSE (Green)
Fault Light
Hookswitch
Handset
Volume Control
Speaker
Controls loudspeaker audio—press to talk and release to listen.
Switches to alternate key usage for alpha characters.
Terminates most operations, and typically allows the user to
exit programming without saving.
Initiates an urgent stat service request.
Initiates Nurse Follower operations. The button's LED will light
while function is in use.
Initiates Aide service request.
Initiates Nurse service request.
Copyright © TekTone Sound & Signal Mfg., Inc. All Rights Reserved.
(Figure 1, Figure 2)
®
LCD Display
Call Light
Function Buttons
Numeric Keypad
Microphone
NC300 II
™
Tray