Nc305Lcd Master Station, Nc313 & Nc315 Monitors Call Display - TekTone Tek-CARE NC300II Operation, Installation And Service Manual

System Operating Instructions
NC305LCD Master Station, NC313 & NC315 Monitors Call Display
Copyright © TekTone Sound & Signal Mfg., Inc. All Rights Reserved.
Primary Master Indicator: A double asterisk (**) indicates that the associated master
station is the primary master station on the system, also known as master address
#1. A single asterisk (*) indicates that the associated master station is not the pri-
mary master station.
Room Column: Displays the architectural room number of the calling station.
Label Column: The programmable 16-character label assigned to the calling station.
Call Column: The call type (ROUTINE, BATH, STAFF, etc.).
Time Column: The time the call was placed.
Nurse Column: Locations (room numbers) of nurse requests and presence registration.
Aide Column: Locations (room numbers) of aide requests and presence registration.
Stat Column: Locations (room numbers) of STAT calls.
Menu Box: This is displayed when the menu button is pressed. See
information.
Programming using NC304, NC304LCD, NC305LCD Master Stations
Tone-Off Indication: When "Tone Off" is displayed, routine call tones are silenced.
When "Tone On" is displayed, routine call tones will annunciate.
Time: The time the last system activity occurred is displayed here.
Call Types and Priority Indications: Incoming calls are displayed in Standard English.
They are displayed in order of origination and priority (see Priority Listing below).
Up to 22 call events may be displayed at the same time. Additional calls are stored
in memory and are indicated by a "MORE CALLS WAITING" message. A ROUTINE
call will be upgraded to PERSONAL ATTENTION once the overtime limit is exceeded.
If a Nurse or Aide request is allowed to exceed the overtime limit, a call will auto-
matically be generated for the associated room.
High Priority CODE CALL
Priority Listing
FIRE *
MONITOR
Medium Priority EMERGENCY
BATH
PRIORITY
BED OUT
CORD OUT
Low Priority PERSONAL ATTENTION
DUTY
STAFF
ROUTINE
* NOTE: The Tek-CARE
and is not intended as a primary means of evacuation.
(Figure
® ™
NC300 II System is not tested as a fire alarm system
IL715 Tek-CARE
9)
for additional
Configuration and
NC300II Manual • 9
®