ProMinent DULCOMETER D2C Operating Instructions Manual page 19

Operating Menu / Description
Measuring chlorine
The measuring range (factory setting 0-2.00 ppm) must correspond to the chlorine measuring cell used.
The factory setting (limits, setpoint...) is reset if the measuring range is altered.
measuring range
chlorine setting?
Measuring range
Outputs 0/4 - 20mA
The mA outputs may be used either for documentation of the measuring value or as regulated value. When
the regulated value is set, the metering direction selected in "control" will be automatically used!
mA outputs
setting?
measuring range
0 ... 2.00 ppm
Possible values
Initial value Increment
0...2 ppm 0...2 ppm
0...0.5 ppm
0...5 ppm
0...10 ppm
0...20 ppm
0...50 ppm
0...100 ppm
mA output 1
pH
mA output 2
chlorine
mA output
end
Lower value
mA output 1
measured value
20 mA = 12.00 pH
mA output 1 mA output 1
pH acid
measured value
4 ... 20 mA 20 mA = 100 %
mA output 1
correction value
20 mA = 100 °C
mA output 2
measured value
20 mA = 2.00 ppm
mA output 2
chlorine
measured value
4 ... 20 mA
mA output 2
chlorine
20 mA = 100 %
Upper value
4 mA = 2.00 pH
4 mA = 0 %
4 mA = 0.0 °C
4 mA = 0.00 ppm
4 mA = 0 %
Remarks
19