Table of Contents
Advertisement
Smart Charger Re-Programming
With the Smart Charger, you can renumber pagers back into sequential order as well as ensure that all pagers have
the same configuration.
Program Pagers
The pagers will be set to the programming applied prior to
shipping as well as renumbering the pagers into sequential
order.
First position, indicated by the location with the ,
>
will be renumbered to the number shown on the
charger's display
>
Pagers will renumber based on their position in the
charger, image at right.
>
To activate the programming cycle.
PRESS and HOLD the PROG button on the
o
charger for eight (8) seconds.
o
Charger will beep twice indicating that the
cycle has begun.
You will see the pagers perform several
o
functions as it applies each of the pager
configurations. When the process is
complete, all pagers will be in sequential order.
>
NOTE: Replacements for lost pages will arrive with the number 888
on the display.
Replacement of Lost Pagers
Replacements for lost pagers will arrive with the number
display.
>
Place new pagers into the charger in any location EXCEPT position #1 and use the PROG function listed above
to have them work with your existing system.
800.321.6221
ServerCall Paging, Rugged Staff Pagers
8 8 8
on the
User Manual
Model Number: J1703, J1704
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ServerCall J1703 and is the answer not in the manual?
Questions and answers
Que distancia de alcance tiene?
The context does not specify the exact range distance of the JTECH J1703. It only mentions that you can perform a range test by turning on the feature and walking around with the pagers to determine the transmitter's range. Therefore, the specific range distance cannot be determined from the provided information.
This answer is automatically generated