Table of Contents
Advertisement
Back Panel
DSL
Telephone jack (RJ-11) to connect to your Telephone Wall Socket (ADSL line).
RESET
To reset your ADSL Router to factory default settings.(All customised settings that you
have saved will be lost!)Please refer to the below footer 2 on how to activate the reset
function.
ETHERNET
10/100 Base-T Ethernet jack (RJ-45) to connect to your Ethernet Network card or
Ethernet Hub / Switch.
DC IN
To connect to the Power Adapter that comes with your package.
POWER SWITCH
To power on or off the modem.
I - indicates ON position
O - indicates OFF position.
RF Antenna
180° 2.4Ghz Wireless Antenna.
2
To activate the reset function:
-
Ensure that your ADSL Router is powered on.
-
Use a paper clip or a pencil tip to depress the reset button and release. At
this point, the DSL indicator light will go off, followed by the ETHERNET indicators.
The reset is in progress.
-
When the DSL indicator starts blinking, it means that the reset process is
completed. The default settings are now restored.
-
ADSL line is established once the DSL indicator lights up.
Easy Start
5 of 13
Advertisement
Table of Contents
