Advanced Wi-Fi Settings; Wlan Configuration - Motorola LEX L10i User Manual

MN002347A01-B
Chapter 9: Wireless
• Tap User certificate and select a user certificate.
NOTICE: User certificates are installed using the Security settings.
• Tap Identity to enter the username credentials.
• Tap Anonymous to enter an anonymous identity username.
• Tap Password to enter password.
11 Tap .
Return to Process
Wireless Local Area Networks
9.2.5

Advanced Wi-Fi Settings

Use the Advanced settings to configure additional Wi-Fi settings.
NOTICE: Advanced Wi-Fi settings are for the device not for a specific wireless network.
From the Wi-Fi screen, tap → Advanced to view the advanced settings.
• Network notification — When enabled, notifies the user when an open network is available.
• Keep Wi-Fi on during sleep — Opens a menu to set whether and when the Wi-Fi radio turns off.
- Always — The radio stays on when the device enters suspend mode.
- Only when plugged in — The radio stays on while the device is connected to external power.
- Never (increases data usage) — The radio turns off when the device enters suspend mode
(default).
• Wi-Fi optimization — Minimize the battery usage when Wi-Fi is on.
• Avoid poor Connection — Connects to the internet only if connection is good.
• MAC address — Displays the Media Access Control (MAC) address of the device when connecting
to Wi-Fi networks.
• IP address — Displays the IP address of the device when connecting to Wi-Fi networks.
Return to Process
Wireless Local Area Networks
9.2.6

WLAN Configuration

Use the WLAN Configuration settings to configure additional WLAN settings.
From the Wi-Fi screen, tap → Advanced to view the settings. The following two settings are used to
configure WLAN:
• Wi-Fi frequency band
- Auto (2.4GHz and 5GHz) —Use both the 2.4 GHz and 5 GHz bands (default).
- 5GHz Only — Use only the 5 GHz band.
- 2.4GHz Only —Use only the 2.4 GHz band.
• Keep Wi-Fi on during sleep
150
on page 145
on page 145
Send Feedback