MCUXpresso IDE after loading the example demo from SDK.
Flash the software
1.
Connect the PAN4620 Evaluation Board to the PC.
2. Click the Debug icon
The software will be flashed with the onboard J-Link-OB-SAM3U128 to the
PAN4620 module.
3. Click the Start icon
Evaluation Board.
Quick Start Guide Rev. 0.1
.
in the toolbar, to run the application on the PAN4620
In case of more than one connected PAN4620 boards, the IDE will give the
possibility, to choose which should be flashed. Compare the Segger Serial
number/ID (1) with the label on the bottom of the PAN4620 board. Click
OK (2).
PAN4620
4 Getting Started
Page 20