Wi-fi dual band 2.4 ghz/5 ghz and bluetooth module (34 pages)
Summary of Contents for Panasonic PAN1026A
Page 1
PAN1026A Bluetooth Basic Data Rate and Low Energy Module Product Specification Rev. 1.1 Wireless Modules...
Page 2
New Features Overview • Increased (2.5 x) BLE data transfer rates through The PAN1026A is a Class 2 Bluetooth 4.2 Basic extended MTU size (64 bytes to 160 bytes) Data Rate and Low Energy module for easy • More complex BLE profiles possible through...
Page 3
By purchase of any of the products described in this document the customer accepts the document's validity and declares their agreement and understanding of its contents and recommendations. Panasonic reserves the right to make changes as required at any time without notification. Please consult the most recently issued Product Specification before initiating or completing a design.
PAN1026A Bluetooth Module Table of Contents About This Document ......................... 5 Purpose and Audience ......................5 Revision History ......................... 5 Use of Symbols ......................... 5 Related Documents ........................5 Overview .............................. 6 Block Diagram ........................... 7 Pin Configuration ........................8 UART Interface ........................
1.1 Purpose and Audience This Product Specification provides details on the functional, operational, and electrical characteristics of the Panasonic PAN1026A module. It is intended for hardware design, application, and Original Equipment Manufacturers (OEM) engineers. The product is referred to as “the PAN1026A” or “the module” within this document.
The PAN1026A module is manufactured in a small 15.6 x 8.7 x 1.9 mm SMD package with a shielded case and it is qualified according to the Bluetooth 2.1 and 4.2 standards.
PAN1026A Bluetooth Module 2 Overview 2.2 Pin Configuration Pin Assignment Top View 15.6 mm Pin Functions No Pin Name GPIO No Pin Type Description A1 GND Ground Pin Connect to ground A2 NC Not connected, leave open A3 Reset...
Page 9
PAN1026A Bluetooth Module 2 Overview No Pin Name GPIO No Pin Type Description B1 NC Not connected, leave open B2 BTS GPIO 11 B3 BTA GPIO 10 B4 NC Not connected, leave open B5 NC Not connected, leave open...
PAN1026A Bluetooth Module 2 Overview No Pin Name GPIO No Pin Type Description E7 PCMOUT GPIO 02 Digital Output PCM Output: not supported E8 GND Ground Pin Connect to ground E9 GND Ground Pin Connect to ground F1 GND...
PAN1026A Bluetooth Module 3 Detailed Description 3.2 Footprint The outer dimensions have a tolerance of 0.3 mm. Top View 15.6 mm Product Specification Rev. 1.1 Page 12...
PAN1026A Bluetooth Module 3 Detailed Description 3.3 Packaging The product is a mass production status product and will be delivered in the package described below. 3.3.1 Tape Dimensions 3.3.2 Packing in Tape Direction of unreeling (for customer) Top cover tape more...
Page 15
PAN1026A Bluetooth Module 3 Detailed Description 3.3.5 Package Label Example (1T) Lot code (1P) Customer order number, if applicable (2P) Order number (9D) Date code Quantity (HW/SW) Hardware/software version 3.3.6 Total Package Product Specification Rev. 1.1 Page 15...
PAN1026A Bluetooth Module 3 Detailed Description 3.4 Case Marking Example MIC ID Brand name Hardware/software version Order number FCC ID Lot code Engineering Sample marking, if applicable Marking for Pin 1 2D barcode, for internal usage only Product Specification Rev. 1.1...
PAN1026A Bluetooth Module 4 Specification 4 Specification All specifications are over temperature and process, unless indicated otherwise. 4.1 Default Test Conditions Temperature: 25 ± 10 °C Humidity: 40 to 85 % RH Supply Voltage: 3.3 V 4.2 Absolute Maximum Ratings The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result.
PAN1026A Bluetooth Module 4 Specification 4.3 Recommended Operating Conditions The maximum ratings may not be exceeded under any circumstances, not even momentarily or individually, as permanent damage to the module may result. Symbol Parameter Condition Min. Typ. Max. Units Ambient °C...
PAN1026A Bluetooth Module 4 Specification 4.5 Bluetooth Parameter Condition Min. Typ. Max. Units Operation 2 402 2 480 frequency range Channel BT-Classic/BLE spacing Output Power Maximum setting, measured at dual ended 50 ohm. Sensitivity Symbol Parameter Condition Min. Typ.
PAN1026A Bluetooth Module 4 Specification 4.7 Recommended Soldering Profile • Reflow permissible cycle: 2 • Opposite side reflow is prohibited due to module weight • More than 75 percent of the soldering area shall be coated by solder •...
PAN1026A Bluetooth Module 5 Cautions 5 Cautions Failure to follow the guidelines set forth in this document may result in degrading of the product’s functions and damage to the product. 5.1 Design Notes 1. Follow the conditions written in this specification, especially the control signals of this module.
PAN1026A Bluetooth Module 5 Cautions 5.3 Usage Condition Notes 1. Take measures to protect the unit against static electricity. If pulses or other transient loads (a large load applied in a short time) are applied to the products, check and evaluate their operation befor assembly on the final products.
Panasonic customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panasonic Industrial Devices Europe GmbH for any damages resulting.
6.1.2 Caution The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Panasonic Industrial Devices Europe GmbH may void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 25
Panasonic FCC identifier for this product as well as the FCC Notice above. The FCC identifier is FCC ID: T7VPAN10. This FCC identifier is valid for the PAN1026A. The end product must in any case be labelled on the exterior with: "Contains FCC ID: T7VPAN10"...
6.2 Innovation, Science, and Economic Development (ISED) for Canada English The PAN1026A is licensed to meet the regulatory requirements of Industry Canada (IC). License ID: IC: 216Q-PAN10 Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.
Page 27
PAN1026A Bluetooth Module 6 Regulatory and Certification Information French PAN1026A est garanti conforme aux dispositions règlementaires d’Industry Canada (IC). License: IC: 216Q-PAN10 Il est recommandé aux fabricants d’appareils fixes, mobiles ou portables de consulter la réglementation en vigueur et de vérifier la conformité de leurs produits relativement aux limites d’exposition aux rayonnements radiofréquence ainsi qu’au débit d’absorption spécifique...
The OEM must ensure that IC labelling requirements are met. This includes a clearly visible label on the outside of the OEM enclosure specifying the appropriate Panasonic IC identifier for this product as well as the IC Notice above. The IC identifier is: IC: 216Q-PAN10 ...
As a result of the conformity assessment procedure described in the 2014/53/EU Directive, the end customer equipment should be labelled as follows: PAN1026A in the specified reference design can be used in all countries of the European Economic Area (Member States of the EU, European Free Trade Association States [Iceland, Liechtenstein, Norway]), Monaco, San Marino, Andorra and Turkey.
PAN1026A Bluetooth Module 7 Appendix 7 Appendix 7.1 Ordering Information Variants and Versions Order Number Brand Name Description ENW89837A5KF PAN1026A Bluetooth BT4.2 Basic Data Rate and Low Energy module 1 500 Abbreviation for Minimum Order Quantity (MOQ). The default MOQ for mass production is 1 500 pieces, fewer only on customer demand.
For Panasonic Sales assistance in the EU, visit https://eu.industrial.panasonic.com/about-us/contact-us Email: wireless@eu.panasonic.com For Panasonic Sales assistance in North America, visit the Panasonic Sales & Support Tool to find assistance near you at https://na.industrial.panasonic.com/distributors Please visit the Panasonic Wireless Technical Forum to submit a question at https://forum.na.industrial.panasonic.com...