Run the software
1.
Select the preferred example for running a demo.
2. Enter a Project name suffix (1) to distinguish between different programs in the
workspace.
3. Click Browse (2) to select the location for the project (usually, the predefined
workspace).
We will select the wireless_examples > thread > router_eligable_device >
freertos (3) example to show a Thread network demonstration.
4. Uncheck the box Enable semihost (4) to control the device by using an external
terminal program like HTerm.
5. Click Next > (5).
Quick Start Guide Rev. 0.1
PAN4620
4 Getting Started
Page 18